Technical Sheets of Air Compressor Desiccant Dryer
| 적합한 매체 | compressed air or nitrogen |
| 기계 이름 | heatless modular adsorption air dryer |
| Air capacity of regenerative dryer | Std.3.8Nm3 / min or 133cfm |
| Working principle of compressed dry air system | PSA pressure swing adsorption regeneration |
| Working period of modular desiccant dryer | ≈5 min（adjustable） |
| 재생공기 평균 소비량 | Std.7% | 최소. 5% |
| 입구 공기압 | 표준 7바 | 최소. 6 술집| Max.10 bar |
| Pressure loss at full load | 0.21 술집 |
| 입구 공기 온도 | ≤38℃ | Min.2℃ Max.40℃ |
| Dew point (standard condition) | ≤-40℃ Or Lower Ensure100% |
| 주변 온도 | 최소2℃ 최대45℃ |
| Desiccant beads | alumina + molecular sieve |
| Machine weight | 85KG |
| 치수 | 310×470×1615mm |
| Noise of air compressor dryer system | At a distance of 1 meter from the absorption dryer, |
| the noise is less than 70 데시벨 |
Why Choose Our Modular Type Adsorption Compressed Dry Air
① More Energy Saving
The air compressor desiccant dryer has low air consumption. The air consumption of the modular heatless dryer is generally 7%. But the double tower heatless dryer is generally 13%. 게다가, its structure is simple. 그래서, the air pressure loss is lower. Compared to traditional adsorption air dryers, it can reduce operation costs by 30%~60%.
② Stable Performance
The air compressor dryer system uses high-quality adsorbents. 그래서, the performance of the air desiccant dryer is stable. It adopts a decentralized adsorption unit structure. It can greatly increase effective adsorption area. 따라서, the dew point is more stable.
③ More Hygienic
The main material is magnesium-aluminum alloy. 또한, do anti-rust treatment by oxidation. 그래서, it can effectively prevent secondary pollution. Especially suitable for the food and pharmaceutical industry. Life expectancy can be up to 30 연령.
④ Intelligent Control
This compressed dry air system uses PLC. It has a friendly human-computer interface. So it can realize remote control. The operation is simple and easy to understand. The air supply is continuous and stable. No intermittent air cuts.
⑤ Small Size And Light Weight
The overall structure is compact. Beautiful appearance design. The modular desiccant dryer is easy to transport and install. We can also install it in narrow spaces. So it does not take up a lot of production space.
게다가, the modular adsorption dryer is not a pressure vessel. 그래서, it doesn’t require annual re-inspection. Significant time and cost savings.
⑥ Low Later Maintenance Cost
첫째로, fewer valves are used compared to the twin-tower air dryer. 그래서, the failure rate is lower. Large desiccant dryers use air cylinders. Maintenance is simple and convenient. 또한, the cost of the adsorbent is low. So there are fewer replacements later. 예를 들어, a 3.8m³/min heatless module air compressor desiccant dryer requires 35 adsorbents. But a 3.8m³/min heatless twin tower desiccant dryer requires 60KG adsorbents.
Why Modular Desiccant Air Compressor Dryer System is More Energy Saving
Take a 110KW air compressor as an example. The 5-year electricity consumption of several compressed dry air systems is as follows:
- ① Double tower heatless adsorption dryer: Air consumption is about 13%.
So energy consumption=11012436513%*5=CNY626340.
- ② Twin tower micro-heat regenerative air dryer: air consumption is about 7%. And the electric heating wire power is 4KW.
So energy consumption=1101243657%5+4124365*5=CNY512460.
- ③ Combination desiccant air compressor dryer system: The air consumption is 5%. The power of a refrigerated dryer is 4.5 kW.
So energy consumption=1101243655%5+4.5124365*10=CNY438000.
- ④ Modular air compressor desiccant dryer: The air consumption is 5%. And the electricity consumption is 5 연령:
1101243655%*5=CNY240900.
The modular air compressor dryer system is composed of several cavities. It is equivalent to this situation: several small adsorption towers take adsorption simultaneously. So it can maintain a stable compressed air dew point.
And this structure has benefits. It increases the surface area where the adsorbent and compressed air contact. The contact time will also increase. 그래서, the water absorption effect is multiplied. 마지막으로, it greatly reduces the regeneration air consumption.
It is not like a traditional twin-tower compressed dry air system. The double-tower air dryer has a dead angle of adsorption. Short contact time with desiccant. 게다가, the contact is insufficient. Insufficient drying and regeneration. It needs much air to purge the adsorbents to achieve the dew point. 그러므로, the regeneration air consumption is large.
How Does Modular Air Compressor Desiccant Dryer System Work
The heatless modular compressed dry air system has multiple aluminum cavities. Each group has two cavities. Each cavity is filled with desiccant beads. It’s to dry the moist compressed air. 그 다음에, one cavity is working (drying), and beads will absorb moisture. 이때, the other side will regenerate by PSA.
During regeneration, some dry air expands to atmospheric pressure. Take away the moisture in the adsorbents. 그래서, the desiccant beads can regenerate. We usually use it with a refrigerant dryer and precision filters. 따라서, it will enhance the performance and reliability of the air compressor desiccant dryer system.
When Group A is adsorbing, the intake valve A1 opens. 동시에, muffler exhaust valve B1 closes. The outlet check valve C1 of the air compressor desiccant dryer system also opens. Compressed air enters the downpipe from A1. 그 다음에, enter the upper trachea after adsorption. The dry air flows to the air consumption section through C1. Part of the dry air enters Group B through regeneration valve D1. 그래서, Group B started regeneration.
When Group B is regenerating, intake valve A2 is closed. Muffler exhaust valve B2 of the compressed dry air system opens. 동시에, the outlet check valve C2 closes. The regeneration air enters the upper air pipe through valve D2. The air performs analytical regeneration on the desiccant beads. 마지막으로, it will discharge the moisture from the muffler exhaust valve B2.
How to Install Filters to Air Compressor Desiccant Dryer System
The filters can improve our compressed air quality. 동시에, it can protect our desiccant beads.
(1) Install The Pre-filter Before Adsorption Air Dryer
그건, install water-removal and oil-removal filters. Add them in front of the air compressor desiccant dryer system. If there is a lot of liquid water, it will affect the dryer effect. This results in an increase in the outlet dew point. 게다가, oil mist can seriously pollute the desiccant beads. It will also raise the dew point. 동시에, it will shorten the service life of the adsorbent. After filtration, the liquid microparticle content will reach 0.01 μm. And the residual content of oil vapors will reach 0.01ppm.
(2) Install The Post-filter on The Compressed Dry Air System
The desiccant beads are under pressure and shock for a long time. It will generate some adsorbent dust. 그래서, we need to ensure the quality of the downstream compressed air. 그 다음에, installing the post-filter on the air compressor desiccant dryer system is necessary. 여기, we use the dust-removal filter.
FAQ
High-efficiency activated alumina + high-efficiency molecular sieve. Both are from China famous brand.
It is about 8000~12000 hours. The specific replacement time is based on the compressed air quality.
확신하는. There are two advantages to installing the compressed air filters. 첫째로, it can ensure the compressed air quality. 둘째, it can extend the lifetime of desiccant dryer and adsorbent.
The dew point can be -20℃ and -40℃ for modular adsorption air dryers.
