Features of The Air Compressor Desiccant Dryer
A. Ultimate Energy Saving
Compared with the fixed cycle mode, the self-developed ebz200-2 multi-core drive can save more than 10% of the comprehensive energy consumption. The dew point energy-saving control can be selected, and the adsorption time of a single tower can be prolonged under the condition of load fluctuation. The comprehensive energy consumption can be reduced by more than 30%. Compared with the traditional heatless regenerative dryer, it can save more than 70% energy and is the best choice for matching centrifuge and oil-free screw compressor.
B. Precise Control System
- High-performance pneumatic valve, reliable performance, long service life.
- Taiwan brand high-pressure fan.
- International brands such as French Schneider are selected for electrical components.
- Siemens PLC controller, Kunlun Tongtai 7-inch large screen touch screen, dynamic monitoring of the operation process.
- Customized high-performance adsorbent, designed filling allowance of 20%.
- 304 stainless steel control air source pipeline, beautiful and elegant.
- The specially designed diverter has high adsorbent utilization and low gas pressure loss.
- High-efficiency cooler was designed by HTF software.
C. High-end Product Configuration
- High-performance pneumatic valve, reliable performance, long service life.
- Taiwan brand high-pressure fan.
- International brands such as French Schneider are selected for electrical components.
- Siemens PLC controller, Kunlun Tongtai 7-inch large screen touch screen, dynamic monitoring of the operation process.
- Customized high-performance adsorbent, designed filling allowance of 20%.
- 304 stainless steel control air source pipeline, beautiful and elegant.
- The specially designed diverter has high adsorbent utilization and low gas pressure loss.
- High-efficiency cooler was designed by HTF software.
D. Precise Control System
Through RS485 communication interface MODBUS-RTU communication protocol (if other communication protocols are adopted, it will be determined by negotiation separately). Collect equipment operation parameters, remote start and stop control, upload and realize the operation status monitoring, and various fault information.
The most comprehensive signal acquisition, monitoring, and display, including inlet temperature, heater temperature, regeneration tail gas temperature, a / b tower pressure, fan pressure, and dew point temperature (optional).
Working Principle of Air Compressor Desiccant Dryer
The blower heated regenerative adsorption desiccant dryer（Micro gas consumption）is composed of two adsorption towers that work alternately. Including a blower, electric heater system, switching valve system, control system, etc. In the whole working cycle, one adsorption tower is in adsorption, the other adsorption tower is in regeneration desorption. On the basis of the micro heat regeneration adsorption dryer, an independent high-efficiency blower is added. The ambient air inhaled by the blower is heated by the heater to desorb the moisture from the adsorbent. In the cooling stage, about 2% of the finished gas is used as the regeneration gas. The whole regeneration process consumes very little compressed air.
