Product Performance Sheet of Lingyu Low Cost Nitrogen Generator
Model | LYZD-E500 |
Gas Flow | Std.500 Nm3/ h |
Purity | 99.99% n2 nitrogen gas generator |
يكتب | PSA twin tower type |
Work Cycle Time (Each Tower) | 45-60 seconds(time is adjustable) |
Adsorption Pressure of N2 Onsite System | الأمراض المنقولة جنسيا.0.8MPa | دقيقة.0.5MPa |
Exit Pressure of N2 Gas | 0.1~0.65MPa (the outlet pressure is adjustable according to flow and purity) |
Intake Air Oil Requirement | .0.01 جزء في المليون (so there is oil-removal filter before n2 psa system) |
Dust Content of Outlet Nitrogen Gas | .0.01um |
Entrance Air Temperature | ستد.30 درجة مئوية | الحد الأدنى 2 درجة مئوية الحد الأقصى 40 درجة مئوية |
System Outlet Gas Atmospheric Pressure Dewpoint | ≥-20 درجة مئوية (it can be up to: -40 ~ -70 ℃ with desiccant air dryer) |
Air Inlet Size of On Site Nitrogen Generator | DN100 / 4″ |
Air Outlet Size of Nitrogen Generation Unit | DN80 / 3″ |
Machine Voltage | 1-المرحلة 220 فولت 50 هرتز (230الخامس, 240V أو 60 هرتز مخصصة) |
Total Power | 0.3كيلوواط |
Equipment Net Weight | 6500 كلغ |
Size of N2 Onsite Machine | 3750 H×4200 L×2100W (مم) |
Noise Level | ≤70dB(A)(1m away from the nitrogen generation unit) |
Operation Data Signal Acquisition / يراقب / عرض | |
N2 Generator Dew Point Temperature Display | No (custom) |
N2 Gas Purity Meter | نعم |
Gas Flow Meter | نعم |
عرض ضغط مدخل/مخرج الهواء | No (custom) |
Run/Fault Indication Display | نعم |
Process Flow Diagram Display | نعم |
Work Cycle Time Display | نعم |
Working Cycle Step Status Display | نعم |
Valves Working Status Display | No (custom) |
Control Functions of This Low Cost Nitrogen Generator | |
التحكم في اتصالات إنترنت الأشياء | No (custom) |
التواصل عن بعد (RS485/RS232) | نعم |
تشغيل/إيقاف الطاقة المحلية/البعيدة | نعم |
Chain Control of N2 Onsite System | نعم |
التحكم بالدورة الثابتة | نعم |
عرض نقطة الندى المفرطة | نعم |
N2 Gas Impure Emptying Display | نعم |
عرض صيانة الفلتر | No (custom) |
Adsorbent Carbon Molecular Sieve Maintenance Display | نعم |
Features of This N2 Onsite Nitrogen Generation Unit
① Easy Operation
أولاً, the nitrogen generation unit is with a PLC controller. The pneumatic valve of the n2 onsite system can switch automatically. It can realize automatic stop-start switching. The system can produce nitrogen gas within 15 دقائق من بدء التشغيل. لذلك, the machine can be left unattended. علاوة على ذلك, you can control the PSA nitrogen plant remotely.
② Low Cost
ثانيًا, we are a nitrogen plant manufacturer. We can offer good price to our customers. علاوة على ذلك, the gas consumption is small. The machine has an energy-saving control system. لذلك, the running cost is also low.
③ Real-time Monitoring And Digital Display
ثالثا, the system comes standard with a purity meter and flow meter. لذلك, it can monitor the purity and flow rate of nitrogen gas in real-time. علاوة على ذلك, the individual parameters are displayed digitally. It is easy to manage and control.
④ Top-quality Carbon Molecular Sieve And Valves
The lifetime of our carbon molecular sieve is 4~5 years. علاوة على ذلك, we fill them with the blizzard method. And there is a cylinder compression device at the top. فضلاً عن ذلك, our n2 onsite machine uses high-quality valves. The service life of pneumatic valves is more than 5 سنين. So the nitrogen generation unit is stable and reliable.
⑤ Intermediate Pressure Equalization
The traditional pressure equalization process is different. Its equalizing position is at the bottom. في هذا الطريق, the nitrogen production efficiency of carbon molecular sieves is relatively low. But our n2 onsite generator adopts intermediate pressure equalizing. This process has many advantages. على سبيل المثال, it increases the nitrogen gas recovery. Gas production rises. بجانب, it can save energy consumption.
الأسئلة الشائعة
س1: How to size and select an air compressor for my nitrogen generation unit?
أ1: Take this 500Nm3/h low cost nitrogen generator as an example. Its purity is 99.99%. So the air nitrogen ratio is 6:1. We use Q to refer to the air capacity of the air compressor.
Q=500*6=3000Nm3/h=50m3/min.
لذلك, we should select the air compressor and dryer according to this air capacity.
Q2: What’s the delivery time of your n2 onsite generator?
A2: It will take about 30~40 days.
س3: Do you also provide a screw compressor and refrigerant dryer?
A3: نعم. We are a nitrogen plant manufacturer. And we provide a complete n2 PSA system solution.
س 4: Does your n2 onsite generator accept customization?
A4: نعم. Our factory can customize the low cost nitrogen generator as customer requests.