Max 16Bar koalescenční filtr stlačeného vzduchu s automatickým vypouštěním

Za prvé, our filter element adopts the American HV brand paper. Tak, it can effectively guarantee the filtration accuracy and effect. Because of the stainless steel inner mesh, the anti-corrosion strength is high. Taky, there is a stainless steel mesh support on the outside. Proto, it can ensure sufficient strength and stability of the filter.

Navíc, the compressed air filter housing is made of aluminum alloy. Because of the one-piece die-casting, the structure is compact. And long-lasting. kromě, the casing has undergone strict surface treatment. To znamená, it passes cleaning, degreasing, electrophoretic treatment, and spraying. Tím pádem, it improves the durability. The working temperature can be up to 80℃. And application pressure of our compressed air coalescing filter is Max 16Bar.

Each housing passes a 100% pressure test twice. Semi-finished products do a leak test. The finished product also does a pressure test again. Proto, it can prevent leakage of the compressed air coalescing filter. Avoid wasting energy. Ve stejnou dobu, fully guarantees the interests of users.

Navíc, our coalescing filter for air compressors also passes strict tests for filtration accuracy and efficiency. The test refers to the standard ISO8573.1-2010. The oil content after filtration by AX filter is ≤ 0.005ppm @21℃. And 0.01μm filtration efficiency is 99.98%. The 1.0 μm filtration efficiency is 100%.

Za prvé, the coalescing filter is with an automatic drain. It can remove moisture in the air compressor system in time. So guarantees compressed air quality. Ve stejnou dobu, it can protect the service life of the filter element.

Za druhé, the filter has a differential pressure gauge or indicator. They can indicate the working condition of the filter element. If blocked, the pointer will be in the red zone. So it indicates that we need to replace the filter element.

Za třetí, the regular compressed air coalescing filter also has a level mirror. Na jedné ruce, we can observe the condition of the automatic drain. Na druhou stranu, we can also judge if there is air pollution in front.

The coalescing filter for air compressor adopts a smooth elbow design. It greatly reduces turbulence. Proto, it can reduce the pressure loss effectively. Navíc, we use HV filter paper. Its high filtration effect can also effectively reduce the residual pressure drop.

The upper and lower structures of filter housing are integrated. The upper part is the “tube head”. And the lower body is the “tube body”. The new deflector elbow replaces the old 90° straight corner. The air inlet of the filter is designed in the shape of a “bell mouth”. Proto, it can reduce the resistance caused by gas turbulence. Compressed air flow is smoother. So it can greatly reduce pressure loss.

kromě, the upper part of the filter element has an internal gas flow distributor. It also reduces turbulence. And effectively distribute the compressed air passing through the filter element. It is beneficial to improve the air distribution and balance efficiency inside. So it will increase the filter area. Ve stejnou dobu, will also reduce the pressure drop.

The hydraulic system has high requirements for the cleanliness of the hydraulic oil. Rovněž, pneumatic systems also have high requirements for compressed air. The compressor discharges air. But pneumatic devices cannot be them directly.

Air compressors suck in air containing moisture and dust. Po stlačení, the air temperature will increase to above 100°C. V tuto chvíli, part of the lubricating oil inside will also become gaseous. Proto, compressed air contains oil, vlhkost, and dust. kromě, it is a high-temperature air. If sent directly to the downstream, it will reduce the reliability and service life of the pneumatic system. The resulting losses will be huge. It will be much more than the cost and maintenance of pneumatic devices. So the compressed air coalescing filter is absolutely necessary.

Moisture has a rusting effect on pneumatic components and pipes. And cause the moving parts to become stuck or worn. Konečně, make the pneumatic components malfunction and leak. In cold regions, zamrznutí vlhkosti může způsobit zamrznutí potrubí. Navíc, dust in the compressed air will wear down the cylinder. So reduce the service life of the system.

To sum up, we should use the coalescing filter for air compressor. This can improve the quality of compressed air. At the same time protect our precision equipment.