Features The of Regenerative Desiccant Air Dryer
- Πνευματική βαλβίδα υψηλής απόδοσης, αξιόπιστη απόδοση, μεγάλη διάρκεια ζωής.
- Ανεμιστήρας υψηλής πίεσης μάρκας Ταϊβάν.
- Διεθνείς μάρκες όπως η γαλλική Schneider επιλέγονται για ηλεκτρικά εξαρτήματα.
- Ελεγκτής PLC Siemens, Kunlun Tongtai 7 inch large screen touch screen, δυναμική παρακολούθηση της διαδικασίας λειτουργίας.
- Προσαρμοσμένο προσροφητικό υψηλής απόδοσης, σχεδιασμένο επίδομα πλήρωσης του 20%.
- 304 αγωγός πηγής αέρα ελέγχου από ανοξείδωτο χάλυβα, όμορφο και κομψό;
- Ο ειδικά σχεδιασμένος εκτροπέας έχει υψηλή αξιοποίηση προσροφητικού και χαμηλή απώλεια πίεσης αερίου.
- Το ψυγείο υψηλής απόδοσης σχεδιάστηκε από το λογισμικό HTF.
Operating Conditions And Technical Requirements
Rated air inlet pressure
|
0.7MPa (0.6-1.0mpa is allowed to be used; other working pressures are customized)
|
Rated air inlet temperature
|
125 ℃ (110 ℃ – 140 ℃ allowed)
|
Outlet pressure dew point
|
≤ – 20 ℃, ≤ – 40 ℃ (other pressure dew points are required to be customized)
|
Rated ambient temperature
|
35 ℃ (2 ℃ – 40 ℃ allowed)
|
Cooling water pressure
|
2bar-6bar
|
Cooling water temperature
|
25 ℃ (2 ℃ – 32 ℃ is allowed to use)
|
Pressure loss
|
≤ 0.035MPa
|
The oil content of intake air
|
Oil-free air
|
Average regeneration gas consumption
|
≈ 2%-3%
|
Heat Regenerative Air Dryer Working Principle
The working principle of the micro gas waste heat regeneration dryer is to use the heat of the high-temperature air discharged from the air compressor to directly heat the adsorbent after the adsorption process so that the adsorbent can be completely dehydrated and regenerated. In heating and regeneration, compressed air is not consumed. Only a small amount of compressed air (2% – 3%) is used in the cooling stage, greatly saving energy. Its unique design, fuzzy cycle logic, perfect temperature control, and alarm functions ensure the complete regeneration of adsorbent. It solves problems such as ordinary compression-type heat dryers that can not adapt to changing working conditions, gas volume change, adsorbent bubble water powder crushing, και τα λοιπά.