15kilovatios 20 Compresor de aire de tornillo rotativo HP con secador refrigerado

Parameters of This 20 Compresor de aire de tornillo rotativo hp con secador

No.	Artículo		Unidad	Technical Data of air Compressor with Refrigerated Dryer
1	Rated air flow/exhaust pressure		(m3/min)/bar	2.0m3/min@10bar, 1.28m3/min@16bar
2	Compressor application ambient temperature		℃	-5～+45
3	Cooling type of integrated air compressor			Air-cooled
4	Rear cooler outlet temperature		℃	≤temperatura ambiente+15
5	Cantidad de aceite lubricante		litros/kg	9l
6	Tipo de conducción			Direct drive and integrated
7	Adjustment type of compressor air flow			Permanent magnet VSD
8	Contenido de aceite del aire comprimido		ppm	≤3
9	Noise of air compressor with refrigerated dryer		dB(A)	68±2
10	Modelo de aceite lubricante			S2
11	Setting pressure of compressor safety valve		MPa	Rated work pressurex1.1
12	PM Motor	Air compressor motor power	kilovatios	15
		Velocidad de rotación del motor	rpm	3000
		Motor starting method		PM VSD
		Motor vol./frequency	V/Hz	380/200
		Motor protection class		IP23 or IP54 class
13	Compressor fan	Fan power	kilovatios	0.35
		Tensión/frecuencia	V/Hz	380/50
		Fan rotating speed	Rpm (50hz)	1728
		Fan air volume	m3/hora	3800
14	Integrated refrigerated air dryer	Modelo		TR02
		Refrigerant dryer power	kilovatios	0.52
		Rated dryer air flow	m3/min	2.4
		Dryer voltage & frequency	V/Hz	220V/50Hz
		Dryer inlet temp.	℃	≤65℃
15	Dimensions of 20 hp air compressor with dryer		milímetro	18007581640
16	Air receiver tank volume		l	400
17	peso neto de 20 compresor de tornillo hp con secador		kg	420
18	Outlet air port connection size		pulgada	Rp3/4

Advantages of The Air Compressor With Refrigerated Dryer

Este 20 hp air compressor with dryer is easy to operate and maintain. Además, it’s energy-saving and has low noise.

(1) Reliable Industrial Compressor Airend

The Hanbell airend adopts an advanced profile curve. Internal leakage loss is small. It has a good addendum speed. The profile of the airend is made by grinding, so the precision of the screw is higher. Our compressor airend is highly efficient. Better screw linear speed makes it more than 5% energy-saving than similar products on the market.

The lifetime of the airend rotor largely depends on the life of the bearings. We use the top quality bearings from SKF Company of Sweden. La vida útil es más que 20% longer than ordinary bearings.

(2) Top Quality High Temperature Resistant PM Motor

Our compressor motor adopts 180℃ high-temperature permanent magnet material. It can effectively ensure that the motor does not demagnetize. The quality is stable and reliable. So our 20 hp screw air compressor with dryer has long-lasting life.

(3) High-quality Energy-saving Refrigerated Dryer

The dryer uses a 3 en 1 intercambiador de calor de placas. It has high heat exchange efficiency and more energy saving. Además, it’s with an air-water separator. Its 99.9% separation efficiency ensures efficient water removal. The air compressor with refrigerated dryer can exhaust dry and clear air. The dew point can be up to 3~10℃.

(4) High-efficiency Multi-stage Filter Device

20 hp air compressor with dryer uses the Italy ATS brand filters. The primary filter removes solids. Filtration accuracy is 5 micrones. The ultra-fine filter removes oil and solids. Filtration accuracy is 0.01 micrón. Bajo circunstancias normales, the exhaust oil content is ≤ 3 ppm. So meet the drying and filtering requirements of high-flow high-pressure air cutting.

¿Por qué necesitar? 20 hp Air Compressor Dryer For Laser Cutting

Generalmente, the screw air compressor, tanque, and dryer are independent of each other. But it is very inconvenient during use. Además, the cutting power of fiber laser cutters is increasing day by day. The cutting sheet thickness is constantly increasing. Cutting air pressures are also increasing. De este modo, the existing air filtration system can no longer meet the drying and filtration requirements. This leads to contamination of the focusing lens of the cutting head. Then the cutting effect becomes poor. Finalmente, brings damage to the protective lens. This problem needs to be solved. Por lo tanto, our air compressor with refrigerated dryer came into being.

The working principle of a 20 hp screw air compressor with dryer is as follows:

Rotary air compressor forms high-temperature and high-pressure air. Then refrigerated dryer reduces their temperature. Al mismo tiempo, it can filter moisture, aceite, and solid particles preliminarily. Después, the air is sent to the storage tank. The tank has the function of maintaining and stabilizing the pressure. Además, it can further filter the moisture and precipitate solid particles. Finalmente, the coalescing filters purify the air. Ensure that the air is dry and pure. It can also protect the laser-focusing lens.

preguntas frecuentes

Q1: Can I add the automatic drain onto the filters and tank?

A1: Seguro. If you need to, we can add the auto drain. So it doesn’t need you to drain the water manually every day. This can better ensure the water removal effect of the air compressor with refrigerated dryer.

Q2: What kind of refrigerant do you use in the refrigerated dryer?

A2: It’s usually R22. But we also supply other refrigerant, such as R134a, R410a, etc..

Q3: What’s the production time of your 20 hp screw air compressor with dryer?

A4: If 380V/50HZ is suitable for you, el tiempo de entrega es de aproximadamente 15 días. And we also customize the different voltages, como 220V, 415V, 440V, 460V, and 60HZ, etc.. Then the product time will be longer. It’s about 35~40 days.

Q4: What’s the compressed air quality class supplied by your air compressor?

A4: En primer lugar, this 15kw 20 hp screw air compressor is with refrigerated dryer. The pressure dew point is 3~10℃. En segundo lugar, the air compressor has multi-stage filters. The air oil content is less than 3 ppm. So it can meet the requirements for laser cutting.