Product Performance Sheet of Lingyu Low Cost Nitrogen Generator
مدل | LYZD-E500 |
Gas Flow | Std.500 Nm3/ h |
Purity | 99.99% n2 nitrogen gas generator |
تایپ کنید | PSA twin tower type |
Work Cycle Time (Each Tower) | 45-60 seconds(time is adjustable) |
Adsorption Pressure of N2 Onsite System | Std.0.8MPa | حداقل.0.5MPa |
Exit Pressure of N2 Gas | 0.1~0.65MPa (the outlet pressure is adjustable according to flow and purity) |
Intake Air Oil Requirement | ≤0.01ppm (so there is oil-removal filter before n2 psa system) |
Dust Content of Outlet Nitrogen Gas | ≤0.01m |
Entrance Air Temperature | Std.30℃ | حداقل 2℃ حداکثر.40℃ |
System Outlet Gas Atmospheric Pressure Dewpoint | ≤-20℃ (it can be up to: -40 ~ -70 ℃ with desiccant air dryer) |
Air Inlet Size of On Site Nitrogen Generator | DN100 / 4" |
Air Outlet Size of Nitrogen Generation Unit | DN80 / 3" |
Machine Voltage | 1-فاز 220 ولت 50 هرتز (230V, 240V یا 60Hz سفارشی است) |
Total Power | 0.3KW |
وزن خالص تجهیزات | 6500 کیلوگرم |
Size of N2 Onsite Machine | 3750 H×4200 L×2100W (میلی متر) |
Noise Level | ≤70dB(A)(1m away from the nitrogen generation unit) |
Operation Data Signal Acquisition / نظارت بر / نمایش دادن | |
N2 Generator Dew Point Temperature Display | خیر (custom) |
N2 Gas Purity Meter | آره |
Gas Flow Meter | آره |
نمایشگر فشار ورودی/خروجی هوا | خیر (custom) |
Run/Fault Indication Display | آره |
Process Flow Diagram Display | آره |
Work Cycle Time Display | آره |
Working Cycle Step Status Display | آره |
Valves Working Status Display | خیر (custom) |
Control Functions of This Low Cost Nitrogen Generator | |
کنترل ارتباطات اینترنت اشیا | خیر (custom) |
ارتباط از راه دور (RS485/RS232) | آره |
روشن/خاموش برق محلی/از راه دور | آره |
Chain Control of N2 Onsite System | آره |
کنترل چرخه ثابت | آره |
نمایش بیش از حد نقطه شبنم | آره |
N2 Gas Impure Emptying Display | آره |
نمایشگر تعمیر و نگهداری فیلتر | خیر (custom) |
Adsorbent Carbon Molecular Sieve Maintenance Display | آره |
Features of This N2 Onsite Nitrogen Generation Unit
① Easy Operation
اولا, the nitrogen generation unit is with a PLC controller. The pneumatic valve of the n2 onsite system can switch automatically. It can realize automatic stop-start switching. The system can produce nitrogen gas within 15 دقیقه راه اندازی. از این رو, the machine can be left unattended. علاوه بر این, you can control the PSA nitrogen plant remotely.
② Low Cost
دوما, we are a nitrogen plant manufacturer. We can offer good price to our customers. علاوه بر این, the gas consumption is small. The machine has an energy-saving control system. از این رو, the running cost is also low.
③ Real-time Monitoring And Digital Display
ثالثا, the system comes standard with a purity meter and flow meter. از این رو, it can monitor the purity and flow rate of nitrogen gas in real-time. علاوه بر این, the individual parameters are displayed digitally. It is easy to manage and control.
④ Top-quality Carbon Molecular Sieve And Valves
The lifetime of our carbon molecular sieve is 4~5 years. علاوه بر این, we fill them with the blizzard method. And there is a cylinder compression device at the top. علاوه بر این, our n2 onsite machine uses high-quality valves. The service life of pneumatic valves is more than 5 سال ها. So the nitrogen generation unit is stable and reliable.
⑤ Intermediate Pressure Equalization
The traditional pressure equalization process is different. Its equalizing position is at the bottom. به این ترتیب, the nitrogen production efficiency of carbon molecular sieves is relatively low. But our n2 onsite generator adopts intermediate pressure equalizing. This process has many advantages. مثلا, it increases the nitrogen gas recovery. Gas production rises. بعلاوه, it can save energy consumption.
سوالات متداول
Q1: How to size and select an air compressor for my nitrogen generation unit?
A1: Take this 500Nm3/h low cost nitrogen generator as an example. Its purity is 99.99%. So the air nitrogen ratio is 6:1. We use Q to refer to the air capacity of the air compressor.
Q=500*6=3000Nm3/h=50m3/min.
از این رو, we should select the air compressor and dryer according to this air capacity.
Q2: What’s the delivery time of your n2 onsite generator?
A2: حدود 30 تا 40 روز طول می کشد.
Q3: Do you also provide a screw compressor and refrigerant dryer?
A3: آره. We are a nitrogen plant manufacturer. And we provide a complete n2 PSA system solution.
Q4: Does your n2 onsite generator accept customization?
A4: آره. Our factory can customize the low cost nitrogen generator as customer requests.