Technical Data Introductions of The 7.5 hp Industrial Air Compressor
Air flow /discharge pressure of industrial air compressor 7.5 اسب بخار | 300~700L/min @8 bar, 300~550L/min @10 bar, |
300~420L/min @12.5 bar, 150~300L/min @16 bar | |
Industrial air compressor motor power | 5.5 کیلووات / 7.5 اسب بخار |
Avaiable voltage/frequency | 220V 50HZ single phase, 380V 50HZ three phase, |
60hz & دیگران سفارشی | |
The noise at a distance of one meter | 65دسی بل(آ) |
Cooling method of the air compressor | air-cooled |
Lubricant oil amount of 5.5kw screw air compressor | 2.5L |
Oil content in the discharge air | ≤ 2ppm |
Industrial compressor start mode | variable speed drive start |
(fixed speed drive is also available) | |
Machine outer dimension (L*W*H) | 800*540*755میلی متر |
Outlet size of the rotary air compressor | G1/2″ |
The product weight | about 120KG |
The features of our 5.5kw industrial air compressor | compact, small size and floor area, low noise, |
single-phase and three-phase, | |
wide pressure selection | |
Application industries | رنگ آمیزی, spraying, سندبلاست, woodworking, |
car maintenance, و غیره. |
For the 7.5 hp rotary screw air compressor price, خوش آمدید با ما تماس بگیرید!
چرا لینگیو را انتخاب کنید 5.5 kw Air Industrial Compressor
(1) Spare Parts Optimization
اولا, the motor of our PM VSD industrial air compressor is “IE4”. The electrical conversion efficiency is as high as 95%. با این حال, many air compressor products on the market are not like this. The motor efficiency level of some air compressors is “IE3”. There’s even an “IE2” performance class.
دوما, our airend uses six heavy-duty bearings. بعلاوه, it uses a Morse taper connection. The vibration rate is within 1mm per second. So it works better.
ثالثا, we use a unique inverter. The volume is larger than the 2nd generation product. Therefore our 7.5 hp rotary screw air compressor is more stable.
علاوه بر این, our oil-air separator tank adopts a 5-stage separation technology. Export oil content is less than or equal to 2 ppm. It is better than other screw air compressors.
(2) Good Cooling Effect
The cooler is 2 times larger than the 2nd generation product. The heat dissipation effect is better. بعلاوه, the fan is 4 times larger than the 2nd generation product. It has stronger suction. So the cooling effect is more optimized.
(3) نویز پایین
With a fully enclosed casing, the decibel is less than 65 decibels. There is a filter sponge on the outer edge of the case. It not only has the effect of filtering wind and sand but also has a certain noise-reduction effect.
How to Maintain The 7.5 hp Industrial Rotary Screw Air Compressor
(1) New machine runs for about 500 ساعت ها
- Replace the oil and oil filter;
- Clean the air filter;
- Check whether the air compressor is leaking or loose;
- And check the sewage discharge of the oil storage tank;
- Check the motor temperature rise, current, and the sound of the airend.
(2) Maintenance after 2000 hours of working
- Not replace the air compressor lubricant oil and oil filter;
- Check oil-air separator differential pressure;
- Clean the air compressor cooler;
- Manual inspection of the safety valve;
- Others same as above.
(3) Maintenance items every 6 months or 4000h
- Replace oil and oil filter for the 7.5 کمپرسور هوا پیچ روتاری hp;
- Change the oil-air separation core (or the pressure difference exceeds 0.08MPa);
- Replace lubricating oil for motor and cooling fan bearings;
- Electrical insulation and contact inspection;
- Safety protection device inspection;
- Others same as above.
(4) Maintenance items every 12 months or 8000h
- Replace the oil and oil filter of the industrial air compressor;
- Control system aging inspection,
- Take the safety valve and pressure gauge to the specified department for calibration or replacement,
- Check or replace the pressure controller, solenoid valve, minimum pressure valve, temperature controller, intake valve, transmission device,
- Inspection of the electrical master switch;
- Others same as above.
سوالات متداول
Q1: What’s the available pressure for your 7.5 کمپرسور هوا پیچ روتاری hp?
A1: The pressure of our 5.5 kw screw compressor is wide. There are 8 bars, 10 bars, 12.5 bars, و 16 bars.
Q2: Can this 5.5 kw air compressor be used for laser cutting?
A2: آره. The max pressure is 16 بار. البته, you can also choose this 5.5 kw compressor with dryer and tank.
Q3: Is this 7.5 hp rotary screw air compressor single phase or three phases?
A3: It’s single phase industrial air compressor. البته, we also customize it with three phases.