Technical Parameters of 37kw 50 HP 로터리 스크류 공기 압축기
| Nominal Volume Flow & Pressure of 50HP Rotary Screw Air Compressor | 6.8Nm3/분 @7bar (≈240cfm) |
| 6.2Nm3/분 @8bar (≈218cfm) | |
| 5.2Nm3/분 @10bar (≈183cfm) | |
| 5.0Nm3/분 @12bar (≈176cfm) | |
| Applicable Ambient Temperature | From -5 to +45℃ |
| Cooling Mode of 37KW Screw Air Compressor | 공기 냉각 |
| Compressed Air Exhaust Temperature | About ≤Ambient Temp.+15℃ |
| Lubricate Oil Volume of Industrial Air Compressor 50 HP | 20엘 |
| Driven Mode | Direct |
| Air Flow Adjustment Way | 오후 VFD |
| Discharge Air Oil Content | ≤3 |
| Noise of 50 HP Rotary Air Compressor | 72±2dB(ㅏ) |
| Lubricate Oil Brand & Model | 껍데기, S46 |
| Safety Valve Setting Pressure | Nominal Working Pressure x1.2 MPa |
| Industrial Compressor Motor Power | 37KW |
| Motor Rotating Speed | 3000rpm |
| Voltage/Frequency | Regular 380V/50HZ three-phase (others custom) |
| Protection Class/Insulation Class | IP54 or IP23/F |
| Outer Dimension of 50 HP 스크류 압축기 | 1200x1000x1400mm |
| Net Weight of Our Cheap Price 50 HP Compressor | 677킬로그램 |
| Outlet Connection Size | R1,1/2 inch |
Technical Advantages of Lingyu PM VSD Industrial Air Compressor
(1) Obvious Energy-saving Advantage
Take this 37KW power frequency screw air compressor as an example. The average air production only accounts for 70% of the rated airflow. The machine runs 8000 연간 시간. The electricity fee is 0.7CNY/kWh. Compared with the VSD air compressor, it will consume more electricity bills.
1) No-load power consumption: 30% unloading time * no-load current consumption (45%*37KW/hour)8000 hours/year*0.7CNY/kWh=28000CNY/year
2) Differential pressure power consumption: 70% loading time * differential pressure loss (14% * 37KW/hour) * 8000 hours/year * 0.7CNY/kwh = 20300CNY/year.
To sum up, the PM VSD 50 hp rotary screw compressor can save energy consumption of 28000+20300=48300 yuan/year. This can buy a new machine. It’s higher than the 50 hp compressor price.
(2) Excellent Screw Airend
The compressor airend adopts a five-six-tooth ratio rotor. Compared with the ratio of four and six teeth, it reduces drop by 25%. 그러므로, greatly improves the compression efficiency. The large rotor results in a small leakage area. Further, it improves compression efficiency. 게다가, we use German processing equipment. Tooth shape precision is high. Under continuous operation, the rotor can maintain the optimum clearance value. So airend is stable and efficient. 게다가, the bearing is the Swedish SKF brand. 따라서, the airend is more durable.
(3) High-efficiency Permanent Magnet Variable Frequency Motor
첫째로, the PM compressor motor remains efficient at low loads. At full load, it is at least 9% more efficient than asynchronous motors. 게다가, as the speed is reduced, the energy efficiency remains the same.
둘째, it has a large starting torque. The ratio of the maximum dynamic torque to the rated torque can be more than 3 타임스. The general asynchronous motor is only 1.6 타임스.
셋째, the control is more stable. The response time of the permanent magnet motor is less than 50ms. Air production can be adjustable in a wide range in an instant.
Fourthly, high-temperature-resistant rare earth RuFeB magnets are used. 그러므로, the stability of the 50 hp screw compressor is better.
(4) Reliable Quality Spare Parts
The air compressor air filter adopts multi-stage sealing. It’s flexible and stable. And oil filter can withstand high temperatures of 120°C. The classification efficiency can reach 99%. Compressed air oil content ≤ 3 ppm. The intake valve has a high vacuum. 게다가, the cooling fan has low noise and high air volume.
FAQ
1분기: 이것 50 hp rotary screw air compressor is variable speed or fixed speed type?
A1: This industrial air compressor 50 hp is PM VSD type. There is an inverter inside. Although this VSD 50 hp compressor price is more expensive, it is energy efficient.
2분기: Do I also need the compressed air dryer for the 37KW screw compressor?
A2: This is based on the specific industrial application. 사실은, many industries have requirements for dew point. And they require at least one refrigerated air dryer. Its dew point can reach 3~10℃. 물론, some other industries have lower dew point requirements. 이때, you should also buy a regenerative desiccant dryer.
3분기: What’s the 50 hp screw compressor price?
A3: Pls tell us the voltage you need. Our regular voltage is 380V 50HZ 3-phase. If you need 220V / 240V/ 415V / 440V or 60HZ, then the price will be a bit higher.
4분기: If I customize the color, what’s your MOQ?
A5: For the 50 hp 로터리 스크류 공기 압축기, the color customization MOQ is at least 5 sets.
