In Line Air Water Separator Filter Introduction
This is our newly developed filter. The flow rate of the in line water separator for air compressor is 1.5m3/min. That is about 53 cfm. The Max pressure of our air water separator filter is 16 bar. And available filtration precision is 1.0 microns, 0.01 microns. Its port size is 3/4″ inch. The normal end connection is G thread. Oczywiście, we can also customize the NPT thread.
The main functions are as follows. To jest, to remove dust/particulate, water, olej, and oil vapors & odor. Different filtration grades, and different filter purposes. Ponadto, our factory provides several accessories for choice. Na przykład, you can choose the manual valve, auto drain, or electric drain valve.
Tech Data of The In Line Air Water Separator Filter
|
Filter model
|
LY-D015 AA
|
|
Particle removal precision
|
0.01 micron
|
|
Port size of compressed air filter
|
Rc3/4″
|
|
Flow rate
|
1.5 m3/min (53 cfm)
|
|
Max operation pressure
|
1.6MPa
|
|
Min pressure
|
0 MPa
|
|
Max operation temp
|
80C
|
|
Min operation temp
|
1.5C
|
|
The function of air water separator filter
|
particulate removal
|
|
Accessories
|
manual valve, internal automatic drain, ball type auto drain, electric drain valve, diff. pressure gauge
|
Filtration Grades of Lingyu Air Water Separator Filter
| Element Grade | AO Pre-filter | AA Particulate Removal Filter | AX Oil Removal Filter | ACS Activated Carbon Filter |
| Particle Retention Size | 1.0μm | 0.01μm | 0.01μm | 0.01μm |
| Remaining Oil Content | 0.1 mg/m³ | 0.01 mg/m³ | 0.001 mg/m³ | 0.003mg/m³ |
Excellent Performance of In Line Water Separator
Our company has rich experience in the compressed air treatment industry. Both our dryer and filter separator have reliable performance.
(1) High Efficiency Filter Element
Po pierwsze, it uses high-performance filter paper. The main material is boro-silicate nanoglass fiber. Dlatego, it can guarantee the filtration precision. Po drugie, the element is with 2 layers of stainless steel meshes. They are resistant to the impact of compressed air. Ponadto, there is a layer of high-temperature resistant needle felt inside. Więc, our air water separator filter can resist 80℃ temperature.
(2) High Efficiency Filter Element
Po pierwsze, it uses high-performance filter paper. The main material is boro-silicate nanoglass fiber. Dlatego, it can guarantee the filtration precision. Po drugie, the element is with 2 layers of stainless steel meshes. They are resistant to the impact of compressed air. Ponadto, there is a layer of high-temperature resistant needle felt inside. Więc, our air water separator filter can resist 80℃ temperature.
(3) Max 1.6MPa Operation Pressure
Our filter housings are not welded. It is cast in one piece with aluminum alloy. Dlatego, it is guaranteed that the filter can withstand pressure. We can apply it to the laser cutting industry. Ponadto, our in line water separator for the air compressor passes strict pressure tests. There will be no air leakage when used.
(4) Has An Exquisite Appearance
The outer surface of the filter is treated with anti-corrosion. It uses a high-gloss topcoat. The inside of the housing is treated with electrophoresis. It is durable and guarantees the air quality.
Często zadawane pytania
Pytanie 1: Your normal color is gray. And can you customize the filter colors?
A1: Tak, but there is a quantity limit. For specific information, welcome to contact us.
Pytanie 2: How long should I change the element?
A2: The working lifetime of the element is about 8000 godziny.
Pytanie 3: Does your air-water separator filter remove the oil vapors and odor?
A3: Tak. You can choose our activated carbon compressed air filter.
Pytanie 4: What’s the thread of your in line water separator for air compressor?
A4: Our normal thread is G female. Oczywiście, the NPTF is available for bulk quantity.
