Product Performance Sheet of Lingyu Low Cost Nitrogen Generator
Model | LYZD-E500 |
Gas Flow | Std.500 Nm3/ h |
Pureza | 99.99% n2 nitrogen gas generator |
Type | PSA twin tower type |
Work Cycle Time (Each Tower) | 45-60 seconds(time is adjustable) |
Adsorption Pressure of N2 Onsite System | Padrão.0.8MPa | mín..0.5MPa |
Exit Pressure of N2 Gas | 0.1~0,65MPa (the outlet pressure is adjustable according to flow and purity) |
Intake Air Oil Requirement | ≤0,01 ppm (so there is oil-removal filter before n2 psa system) |
Dust Content of Outlet Nitrogen Gas | ≤0.01um |
Entrance Air Temperature | Padrão 30°C | Min.2℃ Máx.40℃ |
System Outlet Gas Atmospheric Pressure Dewpoint | ≤-20℃ (it can be up to: -40 ~ -70 ℃ with desiccant air dryer) |
Air Inlet Size of On Site Nitrogen Generator | DN100 / 4″ |
Air Outlet Size of Nitrogen Generation Unit | DN80 / 3″ |
Machine Voltage | 1-fase 220V 50 hertz (230V, 240V ou 60 Hz são personalizados) |
Poder total | 0.3KW |
Equipment Net Weight | 6500 Kg |
Size of N2 Onsite Machine | 3750 H×4200 L×2100W (milímetros) |
Noise Level | ≤70dB(A)(1m away from the nitrogen generation unit) |
Operation Data Signal Acquisition / Monitoramento / Mostrar | |
N2 Generator Dew Point Temperature Display | Não (custom) |
N2 Gas Purity Meter | Sim |
Gas Flow Meter | Sim |
Exibição de pressão de entrada/saída de ar | Não (custom) |
Run/Fault Indication Display | Sim |
Process Flow Diagram Display | Sim |
Work Cycle Time Display | Sim |
Working Cycle Step Status Display | Sim |
Valves Working Status Display | Não (custom) |
Control Functions of This Low Cost Nitrogen Generator | |
Controle de comunicação IoT | Não (custom) |
Comunicação Remota (RS485/RS232) | Sim |
Ligar/desligar local/remoto | Sim |
Chain Control of N2 Onsite System | Sim |
Controle de ciclo fixo | Sim |
Exibição excessiva de ponto de orvalho | Sim |
N2 Gas Impure Emptying Display | Sim |
Exibição de manutenção de filtro | Não (custom) |
Adsorbent Carbon Molecular Sieve Maintenance Display | Sim |
Features of This N2 Onsite Nitrogen Generation Unit
① Easy Operation
Primeiramente, the nitrogen generation unit is with a PLC controller. The pneumatic valve of the n2 onsite system can switch automatically. It can realize automatic stop-start switching. The system can produce nitrogen gas within 15 minutos de inicialização. Portanto, the machine can be left unattended. Além disso, you can control the PSA nitrogen plant remotely.
② Low Cost
em segundo lugar, we are a nitrogen plant manufacturer. We can offer good price to our customers. Além disso, the gas consumption is small. The machine has an energy-saving control system. Portanto, the running cost is also low.
③ Real-time Monitoring And Digital Display
Em terceiro lugar, the system comes standard with a purity meter and flow meter. Portanto, it can monitor the purity and flow rate of nitrogen gas in real-time. Além disso, the individual parameters are displayed digitally. It is easy to manage and control.
④ Top-quality Carbon Molecular Sieve And Valves
The lifetime of our carbon molecular sieve is 4~5 years. Além disso, we fill them with the blizzard method. And there is a cylinder compression device at the top. Além disso, our n2 onsite machine uses high-quality valves. The service life of pneumatic valves is more than 5 anos. So the nitrogen generation unit is stable and reliable.
⑤ Intermediate Pressure Equalization
The traditional pressure equalization process is different. Its equalizing position is at the bottom. Desta maneira, the nitrogen production efficiency of carbon molecular sieves is relatively low. But our n2 onsite generator adopts intermediate pressure equalizing. This process has many advantages. Por exemplo, it increases the nitrogen gas recovery. Gas production rises. Além do mais, it can save energy consumption.
perguntas frequentes
Q1: How to size and select an air compressor for my nitrogen generation unit?
A1: Take this 500Nm3/h low cost nitrogen generator as an example. Its purity is 99.99%. So the air nitrogen ratio is 6:1. We use Q to refer to the air capacity of the air compressor.
Q=500*6=3000Nm3/h=50m3/min.
Portanto, we should select the air compressor and dryer according to this air capacity.
Q2: What’s the delivery time of your n2 onsite generator?
A2: It will take about 30~40 days.
Q3: Do you also provide a screw compressor and refrigerant dryer?
A3: Sim. We are a nitrogen plant manufacturer. And we provide a complete n2 PSA system solution.
Q4: Does your n2 onsite generator accept customization?
A4: Sim. Our factory can customize the low cost nitrogen generator as customer requests.