Product Performance Sheet of Lingyu Low Cost Nitrogen Generator
| Модель | LYZD-E500 |
| Gas Flow | Std.500 Nm3/ h |
| Чистота | 99.99% n2 nitrogen gas generator |
| Тип | PSA twin tower type |
| Work Cycle Time (Each Tower) | 45-60 seconds（time is adjustable） |
| Adsorption Pressure of N2 Onsite System | стандарт.0.8МПа | Мин..0.5МПа |
| Exit Pressure of N2 Gas | 0.1~0,65 МПа (the outlet pressure is adjustable according to flow and purity) |
| Intake Air Oil Requirement | ≤0,01 ч/млн (so there is oil-removal filter before n2 psa system) |
| Dust Content of Outlet Nitrogen Gas | ≤0,01 мкм |
| Entrance Air Temperature | Стандарт.30℃ | Мин.2℃ Макс.40℃ |
| System Outlet Gas Atmospheric Pressure Dewpoint | ≤-20℃ (it can be up to: -40 ~ -70 ℃ with desiccant air dryer) |
| Air Inlet Size of On Site Nitrogen Generator | DN100 / 4″ |
| Air Outlet Size of Nitrogen Generation Unit | Ду80 / 3″ |
| Machine Voltage | 1-фаза 220В 50 Гц (230В, 240В или 60 Гц по индивидуальному заказу) |
| Суммарная мощность | 0.3кВт |
| Вес нетто оборудования | 6500 Кг |
| Size of N2 Onsite Machine | 3750 H×4200 L×2100W (мм) |
| Уровень шума | ≤70dB（A）（1m away from the nitrogen generation unit) |
| Operation Data Signal Acquisition / Мониторинг / Отображать | |
| N2 Generator Dew Point Temperature Display | Нет (custom) |
| N2 Gas Purity Meter | Да |
| Gas Flow Meter | Да |
| Отображение давления на входе/выходе воздуха | Нет (custom) |
| Run/Fault Indication Display | Да |
| Process Flow Diagram Display | Да |
| Work Cycle Time Display | Да |
| Working Cycle Step Status Display | Да |
| Valves Working Status Display | Нет (custom) |
| Control Functions of This Low Cost Nitrogen Generator | |
| Управление связью Интернета вещей | Нет (custom) |
| Удаленная связь (РС485/РС232) | Да |
| Локальное/дистанционное включение/выключение питания | Да |
| Chain Control of N2 Onsite System | Да |
| Управление с фиксированным циклом | Да |
| Отображение чрезмерной точки росы | Да |
| N2 Gas Impure Emptying Display | Да |
| Дисплей обслуживания фильтра | Нет (custom) |
| Adsorbent Carbon Molecular Sieve Maintenance Display | Да |
Features of This N2 Onsite Nitrogen Generation Unit
① Easy Operation
Во-первых, the nitrogen generation unit is with a PLC controller. The pneumatic valve of the n2 onsite system can switch automatically. It can realize automatic stop-start switching. The system can produce nitrogen gas within 15 минуты запуска. Поэтому, the machine can be left unattended. Более того, you can control the PSA nitrogen plant remotely.
② Low Cost
Во-вторых, we are a nitrogen plant manufacturer. We can offer good price to our customers. Более того, the gas consumption is small. The machine has an energy-saving control system. Поэтому, the running cost is also low.
③ Real-time Monitoring And Digital Display
в-третьих, the system comes standard with a purity meter and flow meter. Поэтому, it can monitor the purity and flow rate of nitrogen gas in real-time. Более того, the individual parameters are displayed digitally. It is easy to manage and control.
④ Top-quality Carbon Molecular Sieve And Valves
The lifetime of our carbon molecular sieve is 4~5 years. Более того, we fill them with the blizzard method. And there is a cylinder compression device at the top. Кроме того, our n2 onsite machine uses high-quality valves. The service life of pneumatic valves is more than 5 годы. So the nitrogen generation unit is stable and reliable.
⑤ Intermediate Pressure Equalization
The traditional pressure equalization process is different. Its equalizing position is at the bottom. Таким образом, the nitrogen production efficiency of carbon molecular sieves is relatively low. But our n2 onsite generator adopts intermediate pressure equalizing. This process has many advantages. Например, it increases the nitrogen gas recovery. Gas production rises. Кроме, it can save energy consumption.
Часто задаваемые вопросы
Q1: How to size and select an air compressor for my nitrogen generation unit?
А1: Take this 500Nm3/h low cost nitrogen generator as an example. Its purity is 99.99%. So the air nitrogen ratio is 6:1. We use Q to refer to the air capacity of the air compressor.
Q=500*6=3000Nm3/h=50m3/min.
Поэтому, we should select the air compressor and dryer according to this air capacity.
Q2: What’s the delivery time of your n2 onsite generator?
А2: It will take about 30~40 days.
Q3: Do you also provide a screw compressor and refrigerant dryer?
А3: Да. We are a nitrogen plant manufacturer. And we provide a complete n2 PSA system solution.
Q4: Does your n2 onsite generator accept customization?
А4: Да. Our factory can customize the low cost nitrogen generator as customer requests.
