Data Specifications of Lingyu 10hp Rotary Screw Air Compressor
| Air capacity /discharge pressure of 7.5 kw screw compressor | 490~980L/min @8bar, 400~900L/min @10bar, 400~800L/min @12.5bar, 300~600L/min @16bar |
| Rated motor power of air compressor | 7.5 kw/ 10 л.с. |
| Voltage/frequency of the 10hp rotary screw compressor | 380V 50HZ/ 60HZ three phase, and 220V/230V/240V single phase are also customizable |
| Machine noise level at the distance of 1 meter | 65дБ(А) |
| Cooling type of the integrated air compressor | с воздушным охлаждением |
| Lubricant oil amount of 7.5 кВт воздушный компрессор | 3.5л |
| Oil content in the discharge compressed air | ≤ 2 частей на миллион |
| Start mode of the industrial screw compressor | ≤ 2 частей на миллион |
| Объем бака ресивера | 240л |
| Machine outer size (Д*Ш*В) | 1700*600*1260мм |
| Outlet size of the 3 в 1 воздушный компрессор | 1/2 дюйм |
| The net weight of 10 Винтовой воздушный компрессор л.с. с осушителем | about 250KG |
| Air capacity of the refrigeration dryer | 1.0 м³/мин |
| Cooling type of refrigerant air dryer | air-cooled type |
| The pressure dew point of our dryer | within 3~10℃ |
How Does 10 hp Rotary Screw Air Compressor With Dryer Work
The 7.5 kw screw compressor sucks in the surrounding air. Make them into the airend. The male and female rotors start to engage and move. Таким образом, it can change the volume in the airend. В то же время, the cavity is continuously sprayed with oil. The oil can lubricate and cool the screw. This will create a high-temperature oil-air mixture. These mixtures are separated by an oil-air separator. Окончательно, it discharges the air that can be used.
In many applications, there are certain requirements for air dryness. If not removed moisture, it will affect devices using compressed air. It will cause the device to fail to work properly. So the 10hp rotary screw compressor with dryer came into being.
The refrigerated air dryer includes several spare parts. То есть, испаритель, конденсатор, холодильный компрессор, external rotor fan, и т. д.. The moisture inlet of the evaporator connects to the air storage tank. Its dry air outlet extends out of the dryer box. Export dry air for use by other devices. Moisture in the compressed air condenses. Then the drain valve discharges the water.
The compressor powers the refrigerant. Then output to the evaporator. These refrigerants can absorb heat from the air. There are air intake screens on both sides of the dryer box. The cooling airflow of the outer rotor fan takes away the heat dissipated by the condenser. После, cool the refrigerant. Окончательно, remove the moisture in the compressed air. So as to meet the requirements of various equipment on the cleanliness and dryness of air.
Почему стоит выбрать Линъюй 7.5 kw Screw Compressor
(1) High Quality Exhaust Compressed Air
Этот 10 hp rotary screw air compressor with dryer discharges 2~10℃ dew point air. It can remove 99.9% of water in the air. Кроме того, we have also improved the oil-air separation device. There is a slow flow plate between the separation air inlet and the compressed air outlet. It can reduce the compressed air flow rate. Поэтому, it can completely separate oil and air. Air oil content is less than 2 частей на миллион.
(2) Low Working Noise
The decibel of this 10hp rotary screw compressor is only 65dB. We have improved the intake mechanism. Add an elbow at the intake end. It can increase the damping of the intake airflow. Reduce the air flow rate. Поэтому, it reduces the noise of the 7.5 kw screw compressor.
(3) Lower Energy Consumption
Во-первых, we use the IE4 first-class energy consumption motor. This consumes less energy than most air compressor motors. Более того, this 10hp rotary screw air compressor with dryer is VSD type. It can adapt to changes in air consumption. Compared with fixed-speed air compressors, it can save energy by almost 30%.
(4) Application Flexibility
Этот 10 hp rotary screw air compressor with dryer has wide pressures. Доступные давления 8 запретить 16 бар. So it is suitable for both normal industries and laser cutting. Кроме, we can do both three phase and single phase. You can connect it with 220V/ 240V 1-phase. Because of the compact size, этот 7.5 kw screw compressor occupies a small floor area. Then it’s not restricted by the factory area.
Часто задаваемые вопросы
Q1: What’s the refrigerant type of the dryer in your 10hp rotary screw compressor?
А1: Both R22 and eco-friendly R410a, R134a are available.
Q2: А как насчет гарантийного срока вашего 7.5 kw screw compressor?
А2: Наш 10 hp rotary screw air compressor with dryer has reliable quality. And the warranty time is one year.
Q3: What’s the tank volume of this integrated air compressor?
А3: Its size is 240L.
Q4: How long can I get the 10hp rotary screw compressor with dryer after purchase?
А4: Usually it takes about 15~20 days for shipping. If you have special customization, it will take about 35~40 days.
