Heated Blower Desiccant Air Dryer Introduction
The desiccant air dryer is the dual tower. Lingyu is the top reliable regenerative adsorption air dryer manufacturer in China. This product is a zero air loss heated blower air dryer. So its regenerative gas consumption is 0%. For this kind of dryer, our pressure dew point can be -20℃ and -40℃.
แตกต่างจากเครื่องเป่าลมร้อนแบบไม่ใช้ความร้อน, it is an energy-saving machine. Both heating regeneration and cold purge use ambient air. It can effectively save the compressed air. So the whole operation can achieve zero gas consumption. Because it is energy efficient, it is widely used in steel, lithium batteries, chemical metallurgy, medicine, and other industries.
Technical Specification Sheet of Heated Blower Desiccant Air Dryer
เลขที่. | Adsorption Air Dryer Parameter Item | ข้อมูล |
1 | Medium | Suitable for compressed air, อากาศที่ไม่กัดกร่อน |
2 | Air Capacity | Std.65.0Nm3 / นาที | 3900Nm3 / ชม |
3 | Operation Principle | การดูดซับการแกว่งของอุณหภูมิ TSA + blower closed cycle regeneration, zero air consumption |
4 | Work Cycle (Single Adsorption Tower) | มีความยาว 240 นาที | สูงสุด 360 นาที |
5 | Inlet Pressure of Heated Blower Air Dryer | แถบ Std.7 |นาที. 6 บาร์ Max.10 บาร์ |
6 | Dryer Pressure Loss at Full Load | ≤3% Inlet pressure |
7 | Intake Air Oil Content | Oil-free or ≤0.1ppm(mg/m3) |
8 | Air Inlet Temp. | มาตรฐาน 10 ~ 30 ℃ | ขั้นต่ำ 2 ℃ สูงสุด 38 ℃ |
9 | จุดน้ำค้างอากาศเข้า | ≤25℃ |
10 | Outlet Pressure Dew Point of Blower Heated Air Dryer | ≤-40℃ Ensure100% |
11 | อุณหภูมิโดยรอบ. Of Heated Blower Purge Desiccant Dryer | ต่ำสุด 2 ℃ สูงสุด 40 ℃ |
12 | Air Port Size | DN125/ 5 inches |
13 | Power Supply | Total power | 3-phase 4-wire 380V 50 Hz | 48 กิโลวัตต์ |
14 | Dryer Weight | About 3500KG |
15 | Overall Dimensions | 2900 H×2600 W×1850 D (มม) |
16 | Noise of Desiccant Air Dryer for Air Compressor | ≤60 dB(ก) (at 1 m from the dryer) |
17 | Regenerative Exhaust Emission Requirements | High temperature regeneration exhaust must be ducted to the outside |
18 | พลังโบลเวอร์ | 7.5กิโลวัตต์ |
19 | Blower Loading Rate | 100% |
20 | Average Power Consumption of the Blowing Process | <80% of total blower power |
21 | Heater Type/Power | Electric Heater | 40กิโลวัตต์ |
22 | Heating Time/Loading Rate | มีความยาว 120 นาที | กำลังโหลดโดยเฉลี่ย 70% |
23 | Heating Temperature | ขีดจำกัดบน: 190องศาเซลเซียส, ขีดจำกัดล่าง 170°C |
24 | Cooler Form/Material | Tube and fin water cooler/special purple copper tubes |
25 | Cooling Water | ≤9.5t/h |
26 | Cooling Water Pressure | 0.2~0.6เมกะปาสคาล |
27 | Cooling Water Temperature | ≤32℃ |
Advantages of Our Desiccant Air Dryer for Air Compressor
Our heated blower purge desiccant air dryer has many advantages. Our regenerative air dryers usually work together with famous air compressor brands. These air compressor brands are Atlas Copco, อิงเกอร์ซอลล์ แรนด์, ซัลแลร์, เป็นต้น.
(1) Low Point & High Stability
It can 100% ensure -40℃ pressure dew point. นอกจาก, the dew point curve is very smooth. ประการแรก, our dryers use high-quality desiccant beads. That is a high-efficiency alumina and 4A molecular sieve. We use a Sino-foreign joint venture adsorbent brand. นอกจาก, the adsorbent filling is sufficient. Take the 65m³/min heated blower air dryer as an example. The total filling volume is close to 2000 กิโลกรัม. This is more than other manufacturers.
นอกจากนี้, there is an airflow splitter at the bottom of the adsorption towers. ดังนั้น, the compressed air can fully contact with the desiccant beads in the towers. Dry more thoroughly. นอกจากนี้, our dryer has an intelligent control system. It can adjust the operation of the absorption air dryer in real-time. So the dew point of our desiccant air dryer for air compressor is stable.
(2) Highly Energy Saving
This heated blower desiccant air dryer has zero air loss. It’s more energy efficient than the micro-heated dryer. The blower draws outside air for heating and regeneration. So it consumes no compressed air. This zero air loss dryer can save more than 60% of energy compared to a heatless air dryer. ด้านล่าง, we compare the operating costs of three different dryers. They are zero air consumption, heated blower purge, ไม่ร้อน, and micro-heated desiccant dryer.
Operation Fees of Zero Air-loss Heated Blower Desiccant Air Dryer for Air Compressor
รายการ | เครื่องหมาย | ข้อมูล | หน่วย | หมายเหตุ |
Air Flow | ถาม | 65 | ลบ.ม./นาที | —— |
Heater Power | ป1 | 40 | กิโลวัตต์ | —— |
พลังโบลเวอร์ | ป2 | 7.5 | กิโลวัตต์ | —— |
Air Consumption | ถาม | 0 | % | —— |
ปริมาณการใช้น้ำ | โวลต์ | 7 | ไทย | —— |
ค่าไฟฟ้า | ย1 | 1 | หยวนจีน | ไฟฟ้าอุตสาหกรรม |
Water Fee | ย2 | 0.2 | หยวนจีน | น้ำรีไซเคิลทางอุตสาหกรรม |
ค่าไฟฟ้าต่อ ลบ.ม. อากาศ | เค | 5.8 | กิโลวัตต์ | —— |
เวลาการฟื้นฟูหอคอยเดี่ยว | ที1 | 4 | ชม. | —— |
เวลาทำความร้อน | ที2 | 1.5 | ชม. | —— |
Cold Purge Time | ที3 | 2 | ชม. | —— |
Blower Starting Time | ที4 | 3.5 | ชม. | —— |
Operation Time of Desiccant | ต | 8000 | ชม. | —— |
Air Dryer for Air Compressor | ||||
Air Consumption Converted into Electrical Energy | 0 | หยวนจีน | —— | |
Electricity Generated By Power | 136500 | หยวนจีน | ค่า=(P1*t2*0.7+P2*t4)*ที/4 | |
Water Fee | 11200 | หยวนจีน | ค่า=(ว*y2*ท) | |
Total Operation Fees of Zero Air Loss | 147700 | หยวนจีน | ||
Heated Blower Purge Desiccant Air Dryer |
Running Charges of Heatless Air Dryer
รายการ | เครื่องหมาย | ข้อมูล | หน่วย | หมายเหตุ |
Air Capacity | ถาม | 65 | ลบ.ม./นาที | —— |
Heater Power | ป1 | 0 | กิโลวัตต์ | there is no heater |
พลังโบลเวอร์ | ป2 | 0 | กิโลวัตต์ | ไม่มีเครื่องเป่าลม |
Average Air Consumption | ถาม | 15 | % | —— |
ปริมาณการใช้น้ำ | โวลต์ | 0 | ไทย | ไม่ต้องการน้ำหล่อเย็น |
ค่าไฟฟ้า | ย1 | 1 | หยวนจีน | ไฟฟ้าอุตสาหกรรม |
Water Fee | ย2 | 0.2 | หยวนจีน | น้ำรีไซเคิลทางอุตสาหกรรม |
ค่าไฟฟ้าต่อ ลบ.ม. อากาศ | เค | 5.8 | กิโลวัตต์ | —— |
Each Tower Regeneration Time | ที1 | 5 | ชม. | —— |
เวลาทำความร้อน | ที2 | 0 | ชม. | not need heating |
Dryer Cold Purge Time | ที3 | 5 | ชม. | —— |
Blower Starting Time | ที4 | 0 | ชม. | ไม่จำเป็นต้องเป่า |
Running Time of Desiccant | ต | 8000 | ชม. | —— |
Air Dryer for Air Compressor | ||||
ปริมาณการใช้อากาศแปลงแล้ว | 452400 | หยวนจีน | ค่า=(คิว*คิว*เค*ท) | |
เข้าสู่พลังงานไฟฟ้า | ||||
Electricity Generated By Power | 0 | หยวนจีน | ค่า=(P1*t2*0.7+P2*t4)*ที/4 | |
Water Fee | 0 | หยวนจีน | ค่า=(ว*y2*ท) | |
Total Operation Fees of Heatless Air Dryer | 452400 | หยวนจีน | —— |
หยวนจีน 452400 – CNY147700 = CNY 304700. So heated blower air dryer is 67% more energy efficient than heatless dryer.
(3) High Quality Spare Parts
ประการแรก, we adopt a multi-core drive intelligent control system. It can realize operation parameter signal acquisition/monitoring/display. So our heated blower air dryer is stable and reliable. ง่ายต่อการจัดการ.
ประการที่สอง, our heated blower purge desiccant air dryer has top-quality parts. ตัวอย่างเช่น, this zero air loss dryer comes with a Suto brand dew point meter. นอกจาก, our desiccant air dryer for air compressors uses Germany-brand control valves. These pneumatic valves have a lifetime of up to 2 million on/off times. นอกจากนี้, they are high-temperature metal seated valves. นอกจากนี้, we use the imported high-pressure blower. So our adsorption air dryer can operate stably.
เลขที่. | Adsorption Air Dryer Parameter | Measuring | Display Type | Control Type | Standard/ |
พิสัย | Optional | ||||
1 | Dew Point of Desiccant Air | -80~+20℃ | Digital Display | Display/Settings/Alarm | Response |
Dryer for Air Compressor | |||||
2 | Air Inlet Temperature | -50~300℃ | Digital Display | Display/Setting/Alarm | Optional |
3 | Heater Temp. | -50~300℃ | Digital Display | Display/Setting/Alarm | มาตรฐาน |
4 | Regeneration Air Temperature | -50~300℃ | Digital Display | Display/Setting/Alarm | มาตรฐาน |
5 | Blowing Temperature | -50~300℃ | Digital Display | Display/Setting/Alarm | มาตรฐาน |
6 | A/B Tower Pressure Sensor | 10 บาร์ | Digital Display | Display/Setting/Alarm | มาตรฐาน |
7 | A/B Tower Pressure Gauge | 16 บาร์ | Pointer Display | Display | มาตรฐาน |
8 | Operation/Fault Indication | Indicator Light | Display | มาตรฐาน | |
9 | Flow Chart of Heated | LCD | Display/Setting | มาตรฐาน | |
Blower Air Dryer | |||||
10 | Working Cycle Time of Heated | Digital Display | Display/Setting | มาตรฐาน | |
Blower Purge Desiccant Dryer | |||||
11 | Dryer Work Cycle Step Status | Digital Display | Display/Setting | มาตรฐาน |
How Does Heated Blower Air Dryer Work
The compressed air passes through the adsorbent layer. The moisture is separated from the wet air. After some time, adsorption reaches saturation equilibrium. แล้ว, the blower blows out atmospheric air. An electric heater will heat this air. หลังจากนั้น, it starts heating the regeneration of the desiccant beads. So it can restore the adsorption capacity of the adsorbents. ทางนี้, the Twin Towers switch constantly and work in a cycle.
คำถามที่พบบ่อย
ไตรมาสที่ 1: What’s The Main Material Of Your Desiccant Air Dryer For Air Compressor?
A1: The material is a Q235B pressure vessel steel plate. แน่นอน, we can also produce the stainless steel material dryer. So you can use it for the food, medical, and pharmaceutics industry.
ไตรมาสที่ 2: What’s The Cycle Time Of Your Zero Air Loss Heated Blower Purge Desiccant Air Dryer?
A2: The cycle time of a single tower is about 4 ชั่วโมง.
ไตรมาสที่ 3: What’s The Maximum Pressure Of Your Adsorption Air Dryer?
A3: Our factory can also produce a high-pressure regenerative desiccant dryer. ตัวอย่างเช่น, Lingyu can customize 40 บาร์ 60 bar dryers. And for a normal dryer, the max pressure is 100 บาร์.
ไตรมาสที่ 4: What is A Desiccant Dryer For An Air Compressor?
A4: It can remove the water in the compressed air deeply. And get super dew points, such as -20℃, 40℃, and 70℃. We often use it after the refrigerant air dryer. โดยปกติ, there are dual adsorption A/B towers in the dryer.
Q5: Do I Also Need A Refrigerant Dryer Before The Heated Blower Air Dryer?
A5: We usually recommend purchasing a refrigeration dryer as well. A refrigerated dryer removes water and cools temperature down. It is better able to meet the inlet air temperature requirements of the desiccant dryer. นอกจากนี้, it can increase the service life of the adsorbent. At the same time it ensures that the water removal effect more effectively.
คำถามที่ 6: What’s The Production Time Of Your Heated Blower Purge Desiccant Air Dryer?
A6: This zero air loss air desiccant dryer will take about 40~50 days.