Technical Parameters of LYZD-E15 PSA Nitrogen Generator
| N2 Gas Flow | Std.15 Nm3 / Ora |
| Working Principle | pressure swing adsorption nitrogen generation |
| Operation Cycle (Single Tower) | 45~60 seconds（it’s adjustable） |
| Adsorption Pressure of N2 Henerator System | Standard.0.8MPa | min.0.5MPa |
| Outlet Pressure of Nitrogen Gas | 0.1~0,65MPa (it’s adjustable according to flow and purity) |
| Oil Content Requirement in Intake Air | ≤0,01 ppm |
| Dust Content in N2 Gas | ≤0,01um |
| Inlet Air Temperature | Std.30℃ | Min.2℃ Max.40℃ |
| Outlet Gas Atmospheric PDP | ≤-20℃ (If there is desiccant dryer, atmospheric PDP can be up to: -40 ~ -70 ℃) |
| High Purity Nitrogen Generator Purity | ≥99.99% (Load 100%) |
| Air Inlet Dia. of Nitrogen Generation System | DN20 / 3/4" |
| Air Outlet Dia. | DN15 / 1/2" |
| Voltaggio / Frequency | 1-fase 220V 50 Hz (230v, 240V o 60Hz sono personalizzati) |
| Total Power of PSA Nitrogen Generator Plant | 0.3KW |
| Machine Net Weight | 400 Kg |
| Size of Nitrogen PSA Unit | 1900 H×1000 L×600W (mm) |
| Operating Parameters Signal Acquisition / Monitoraggio / Schermo | |
| Dew Point Temperature | optional |
| Nitrogen Purity Meter | standard |
| Flow Meter | standard |
| Visualizzazione della pressione di ingresso/uscita dell'aria | optional |
| Operation/Fault Display of N2 Generator System | standard |
| Process Flow Chart of High Purity Nitrogen Generator | standard |
| Working Cycle Time Display of PSA N2 Generator | standard |
| Valve Operating Status Display | optional |
| Control Functions of PSA Nitrogen Generator Plant | |
| Controllo della comunicazione IoT | optional |
| Comunicazione remota (RS485/RS232) | standard |
| Accensione/spegnimento locale/remoto | standard |
| Chain Control of N2 Generator System | standard |
| Controllo a ciclo fisso | standard |
| Visualizzazione del punto di rugiada eccessivo | standard |
| Nitrogen Impure Emptying Display | standard |
| Visualizzazione della manutenzione del filtro | optional |
| Carbon Molecular Sieve Maintenance Display | standard |
| Valve Fault Display | optional |
Caratteristiche di Lingyu 99.99% High Purity Nitrogen Generator
① Unattended
The nitrogen generator automatically stops and starts. It can generate nitrogen gas quickly within 15 minuti di avvio.
② PLC Automatic Control
Pneumatic valve switching is automatically controlled by PLC. It uses a Siemens PLC controller. So you can control the n2 generator remotely.
③ Real-time Monitoring
Online real-time monitoring of nitrogen purity and flow rate.
④ Alarm Function
Unqualified nitrogen gas active prompt alarm. Effectively ensure the high purity of n2 gas.
⑤ Low Cost
Simple process flow and small footprint. The PSA n2 generator has a low energy consumption of equipment. Perciò, operating cost is low.
⑥ Blizzard Method Filling
There is an automatic compression device at the top. Make the distribution of carbon molecular sieve even. Allo stesso tempo, ensure the lifetime of the carbon molecular sieve.
⑦ Parameter Digital Display
Pressione, purezza, and flow rate operation status are all digitally displayed. It is highly efficient and scientific.
⑧ Unequal Potential Equal Pressure
The nitrogen purity increases gradually from bottom to top. So it improves the nitrogen production efficiency of carbon molecular sieve.
⑨ High Quality Valves
This high purity nitrogen generator adopts top-quality valves. The pneumatic valve opening life reaches 3 milioni di volte. Perciò, it ensures the stable operation of the PSA nitrogen plant.
Domande frequenti
Q1: What’s the available highest purity of your n2 generator system?
A1: The highest purity of our nitrogen generation system can be up to 99.999%.
D2: What’s the working cycle time of your high purity nitrogen generator?
A2: Single tower operation time is 45~60 seconds.
D3: Why is there a gas storage tank after the PSA n2 generator?
A3: Nitrogen storage tank can avoid n2 gas flow fluctuations. Ensures proper back-end production.
D4: What about your delivery time for the n2 generator system?
A4: The delivery time is usually 30~40 days.
Q5: What machines are needed for a PSA nitrogen generator plant?
A5: The PSA nitrogen gas plant needs the below equipment, such as an n2 generator, compressore d'aria, refrigeration air dryer, filters, and storage tank. For all the equipment, we can produce them.
