Features of The Air Compressor Desiccant Dryer
あ. Ultimate Energy Saving
Compared with the fixed cycle mode, the self-developed ebz200-2 multi-core drive can save more than 10% of the comprehensive energy consumption. The dew point energy-saving control can be selected, and the adsorption time of a single tower can be prolonged under the condition of load fluctuation. The comprehensive energy consumption can be reduced by more than 30%. Compared with the traditional heatless regenerative dryer, 以上を節約できます 70% energy and is the best choice for matching centrifuge and oil-free screw compressor.
B. Precise Control System
- 高性能空気圧バルブ, 信頼できるパフォーマンス, 長寿命.
- 台湾ブランドの高圧ファン.
- 電気部品にはフランスのシュナイダーなどの国際ブランドが選ばれています.
- シーメンス PLC コントローラー, Kunlun Tongtai 7-inch large screen touch screen, 運用プロセスの動的監視.
- カスタマイズされた高性能吸着剤, の設計された充填許容量 20%.
- 304 ステンレス鋼制御空気源パイプライン, 美しくエレガントな.
- 特別に設計されたダイバーターは、吸着剤の利用率が高く、ガスの圧力損失が低い.
- HTFソフトウェアにより設計された高効率クーラー.
C. High-end Product Configuration
- 高性能空気圧バルブ, 信頼できるパフォーマンス, 長寿命.
- 台湾ブランドの高圧ファン.
- 電気部品にはフランスのシュナイダーなどの国際ブランドが選ばれています.
- シーメンス PLC コントローラー, Kunlun Tongtai 7-inch large screen touch screen, 運用プロセスの動的監視.
- カスタマイズされた高性能吸着剤, の設計された充填許容量 20%.
- 304 ステンレス鋼制御空気源パイプライン, 美しくエレガントな.
- 特別に設計されたダイバーターは、吸着剤の利用率が高く、ガスの圧力損失が低い.
- HTFソフトウェアにより設計された高効率クーラー.
D. Precise Control System
Through RS485 communication interface MODBUS-RTU communication protocol (if other communication protocols are adopted, it will be determined by negotiation separately). Collect equipment operation parameters, remote start and stop control, upload and realize the operation status monitoring, and various fault information.
The most comprehensive signal acquisition, 監視, and display, including inlet temperature, heater temperature, regeneration tail gas temperature, a / b tower pressure, fan pressure, and dew point temperature (optional).
Working Principle of Air Compressor Desiccant Dryer
The blower heated regenerative adsorption desiccant dryer(Micro gas consumption)is composed of two adsorption towers that work alternately. Including a blower, electric heater system, switching valve system, control system, 等. In the whole working cycle, one adsorption tower is in adsorption, the other adsorption tower is in regeneration desorption. On the basis of the micro heat regeneration adsorption dryer, an independent high-efficiency blower is added. The ambient air inhaled by the blower is heated by the heater to desorb the moisture from the adsorbent. In the cooling stage, だいたい 2% of the finished gas is used as the regeneration gas. The whole regeneration process consumes very little compressed air.