Technical Parameters of LYZD-E15 PSA Nitrogen Generator
| N2 Gas Flow | Std.15 Nm3 / 時 |
| 動作原理 | pressure swing adsorption nitrogen generation |
| Operation Cycle (シングルタワー) | 45~60 seconds（it’s adjustable） |
| Adsorption Pressure of N2 Henerator System | 標準.0.8MPa | 分.0.5MPa |
| Outlet Pressure of Nitrogen Gas | 0.1～0.65MPa (it’s adjustable according to flow and purity) |
| Oil Content Requirement in Intake Air | ≤0.01ppm |
| Dust Content in N2 Gas | ≤0.01um |
| 吸気温度 | 標準30℃ | Min.2℃ Max.40℃ |
| Outlet Gas Atmospheric PDP | -20℃以下 (If there is desiccant dryer, atmospheric PDP can be up to: -40 ～ -70 ℃) |
| High Purity Nitrogen Generator Purity | ≥99.99% (負荷 100%) |
| Air Inlet Dia. of Nitrogen Generation System | DN20 / 3/4” |
| Air Outlet Dia. | DN15 / 1/2” |
| 電圧 / Frequency | 1-相220V 50 Hz (230V, 240Vまたは60Hzはカスタムです) |
| Total Power of PSA Nitrogen Generator Plant | 0.3KW |
| Machine Net Weight | 400 Kg |
| Size of Nitrogen PSA Unit | 1900 H×1000 L×600W (んん) |
| Operating Parameters Signal Acquisition / 監視 / 画面 | |
| Dew Point Temperature | optional |
| Nitrogen Purity Meter | standard |
| Flow Meter | standard |
| 空気入口/出口圧力表示 | optional |
| Operation/Fault Display of N2 Generator System | standard |
| Process Flow Chart of High Purity Nitrogen Generator | standard |
| Working Cycle Time Display of PSA N2 Generator | standard |
| Valve Operating Status Display | optional |
| Control Functions of PSA Nitrogen Generator Plant | |
| IoT通信制御 | optional |
| リモート通信 (RS485/RS232) | standard |
| ローカル/リモート電源オン/オフ | standard |
| Chain Control of N2 Generator System | standard |
| 定周期制御 | standard |
| 過剰露点表示 | standard |
| Nitrogen Impure Emptying Display | standard |
| フィルターメンテナンス表示 | optional |
| Carbon Molecular Sieve Maintenance Display | standard |
| Valve Fault Display | optional |
Features of Lingyu 99.99% High Purity Nitrogen Generator
① Unattended
The nitrogen generator automatically stops and starts. It can generate nitrogen gas quickly within 15 起動から数分.
② PLC Automatic Control
Pneumatic valve switching is automatically controlled by PLC. It uses a Siemens PLC controller. So you can control the n2 generator remotely.
③ Real-time Monitoring
Online real-time monitoring of nitrogen purity and flow rate.
④ Alarm Function
Unqualified nitrogen gas active prompt alarm. Effectively ensure the high purity of n2 gas.
⑤ Low Cost
Simple process flow and small footprint. The PSA n2 generator has a low energy consumption of equipment. したがって, operating cost is low.
⑥ Blizzard Method Filling
There is an automatic compression device at the top. Make the distribution of carbon molecular sieve even. 同時に, ensure the lifetime of the carbon molecular sieve.
⑦ Parameter Digital Display
プレッシャー, 純度, and flow rate operation status are all digitally displayed. It is highly efficient and scientific.
⑧ Unequal Potential Equal Pressure
The nitrogen purity increases gradually from bottom to top. So it improves the nitrogen production efficiency of carbon molecular sieve.
⑨ High Quality Valves
This high purity nitrogen generator adopts top-quality valves. The pneumatic valve opening life reaches 3 百万回. したがって, it ensures the stable operation of the PSA nitrogen plant.
よくある質問
Q1: What’s the available highest purity of your n2 generator system?
A1: The highest purity of our nitrogen generation system can be up to 99.999%.
第2四半期: What’s the working cycle time of your high purity nitrogen generator?
A2: Single tower operation time is 45~60 seconds.
Q3: Why is there a gas storage tank after the PSA n2 generator?
A3: Nitrogen storage tank can avoid n2 gas flow fluctuations. Ensures proper back-end production.
Q4: What about your delivery time for the n2 generator system?
A4: The delivery time is usually 30~40 days.
Q5: What machines are needed for a PSA nitrogen generator plant?
A5: The PSA nitrogen gas plant needs the below equipment, such as an n2 generator, エアコンプレッサ, refrigeration air dryer, フィルター, and storage tank. For all the equipment, we can produce them.
