Specification Parameters of Heatless Desiccant Air Dryer
| Parameter Item | Data |
| Absorption Air Dryer Type | Heatless (no heater or blower) |
| Inlet Air Flow | Std.50.0 Nm3 / 분 | 3000 Nm3 / 시간 |
| Working Principle of Heatless Adsorption Dryer | PSA pressure swing adsorption + heatless regeneration |
| Working Period Cycle | ≈10 min（adjustable） |
| Regeneration Air Consumption | 표준 13% | 최소. 8% 최대 14% |
| Application Pressure | 표준 7바 | Min.6 bar| Max.10 bar (high pressure air dryer custom) |
| Pressure Loss of Desiccant Air Dryer System | About 0.2 술집 |
| Inlet Air Oil Content Requirement | Oil free air or oil content≤0.1ppm（mg/m3） |
| Inlet Air Temp. | 10~30℃ | 최소 2℃ 최대 40℃ |
| Inlet Air Dew Point | 15℃ 이하 |
| Outlet Compressed Air Dew Point | ≤-40℃ Or Lower Ensure100% |
| Dryer Surrounding Temperature | 최소2℃ 최대45℃ |
| Air Port Diameter | DN100 / 4” |
| Regenerative Air Dryer Power | 0.1KW |
| 전압 | 220V 50HZ Single-phase (60HZ available) |
| Dryer Net Weight | 1960 킬로그램 |
| Overall Size (L*W*H) | 2036×1240×2775 mm |
| Machine Structure | Dual tower regenerative desiccant air dryer |
| 장비 소음 | The noise is less than 70 데시벨 (at a distance of one meter) |
| Adsorption Tower Material | Q235B pressure vessel steel plate|GB/T3274-2007 |
| Tower Allowable Max Working Pressure | 10 술집 |
| Allowable Max Working Temperature | 150℃ |
| Desiccant Beads | Highly efficient activated alumina + molecular sieve (3~5mm) |
| Heatless Regenerative Desiccant Air Dryer with PLC or Not | This 50m³/min dryer is with PLC |
| 원격통신 | RS485/RS232 |
Why Choose Our Regenerative Desiccant Air Dryer
(1) Stable Low Pressure Dew Point
Our adsorption air dryer has a stable outlet dew point and high dryness. There are sufficient desiccant beads. 게다가, the adsorbent is of high quality. They have large specific areas and high adsorption capacity. 동시에, wear resistance is high. This ensures that it will not chalk up after long-term use. Service life is 2 에게 3 연령.
게다가, the air dryer uses a long-flow twin-tower structure. Besides there is also an airflow diffusion mechanism. The air can fully contact the adsorbents. So it can remove the moisture effectively. 따라서, the dew point is guaranteed.
(2) Use Top Quality Spare Parts
첫째로, we use high-performance desiccant beads of 3~5mm. They come from the best brand in China. 게다가, we use adsorbents in very large quantities. In total, there are more than 1,000 KG of adsorbent filling. 게다가, molecular sieves are more than aluminum oxide. So we can guarantee the -40°C dew point of our adsorption air dryer.
둘째, the pneumatic components of the dryer are from the famous brand Airtac. The solenoid valve is also Airtac. We use the EPDM sealed wear-resistant pneumatic butterfly valve. The switching action control is reliable. 게다가, the electrical parts are well-known brands such as Chint and Meanwell. 그러므로, the failure rate of our heatless regenerative desiccant air dryer is low.
(3) Easy to Operate
Heatless dryers are the simplest in construction. We have already set and tested dryers before they leave the factory. 그래서, there is no need for the customer to set it up again. 게다가, the regenerative air dryer has a wide range of control functions. There is a PLC programmable controller. 그러므로, you can control and monitor the adsorption dryer remotely. 게다가, this desiccant air dryer is equipped with a TSE dew point energy-saving control. This enables an energy-saving control mode.
Remarks: This function requires that there must be a dew point analyzer. The machine also has a prompt function. 예를 들어, it automatically reminds the maintenance for adsorbents. 물론, other functions can be customized as requested.
How Does A Heatless Desiccant Air Dryer Work
The desiccant dryer working principle is simpler than a refrigerated air dryer. This is because of its simple system structure. Desiccant beads have the property of absorbing water. It is a process in which the two towers continuously switch between adsorption and regeneration. The working cycle is about 10 minutes.
(1) 첫째로, a refrigerant dryer discharges the compressed air. They enter the pipe through the lower inlet. 기후, pass through two precision filters.
(2) The air passes through an open valve on the left side. 그 다음에, it enters Tower A from the bottom up for adsorption drying.
(3) 셋째, the air comes out of the upper part of the A-tower. Most of the dried air passes through the valve towards the outlet.
(4) 궁극적으로, the air passes through the precision compressed air filter. After the filtration is complete, we obtain the high-quality dry air.
(5) The air comes out of the upper part of tower A. A small part of the dried air passes through the regeneration shut-off valve. It enters tower B for regeneration from top to bottom.
(6) The moist air passes through the open valve.
(7) 마지막으로, it is safely discharged through the silencer.
Above are the working flows of a heatless desiccant air dryer.
FAQ
It is a kind of compressed air dryer. And it is different from a refrigerant dryer. The structure is usually a twin tower. And dew point can be -20℃, -40℃, 등.
예. If you need ASME, we can supply it. Please note that the certificate charge is expensive.
The air loss is about 13%.
예. We usually provide the Suto brand dew point meter. If you also buy it, you can control the dryer by TSE dew point energy control.
보증은 1 년도, but we can always provide technical service.
The regular production time is about 45 days.
