How Do You Select And Size The Air Dryer For Air Compressor

The air compressor dryer can handle this maximum flow of compressed air. in primul rand, the user needs to determine this value based on the consumption of all air-consuming equipment and the usage factor. Desigur, if you already have an air compressor, you can send the nameplate to the manufacturer.

As a professional air compressor dryer manufacturer, we tell you responsibly. If you use a lot of air, choose a compressed air dryer with a larger capacity. Acesta este, the air capacity of the dryer should be greater than that of the air compressor. Because in times of high temperature and humidity, the water content of the air increases. Momentan, the dryer machine is overloaded. Asa de, the drying effect will decrease. This can cause many problems, such as large amounts of moisture and equipment breakdown.

Different air pressures and different air capacities of the dryer. The common pressures in industrial production range from 0.6MPa to 1.0MPa. Asa de, the most common is the normal pressure air compressor air dryer.

in orice caz, other industries have different pressure requirements. De exemplu, the laser industry generally requires 16 bars. Some industries require high-pressure compressed air dryers. Our company can customize dryers up to 100 bar.

Temperature is critical to the choice of air compressor dryer. De exemplu, there are two types of refrigerated air dryers. Namely normal temperature (50°C) and high temperature (80°C). The temperature is very high in Pakistan and the Middle East in summer. First, it must choose a high-temperature type of refrigerant dryer. în plus, we often need to choose a larger model. This not only achieves good water removal but also avoids dryer downtime.

Pe de altă parte, the inlet air temperature of the desiccant air dryer should generally not be greater than 40°C. If the temperature is too high, the water removal effect of the adsorbent will be greatly reduced. Desigur, it can choose the HOC type desiccant dryer now.

Different dew point requirements and different equipment configurations. Naturally, the price is different. Refrigerated dryers generally have a pressure dew point of 2 to 10°C. There are different conditions and different dew points. De exemplu, refrigerant compressed air dryers can achieve a very low dew point. But it requires a standard operating condition of 25°C and 7 bar.
Different industries have different requirements for dew points. The following are some examples.

1. Pharmaceutical industry: dew point is at least -40°C.
2. PCB industry: dew point needs to reach -20°C.
3. Gas air separation industry: dew point requires to be -70°C.

Choose a combination dryer if you require a dew point of -70°C. Or there must be a refrigeration dryer and filters before adsorption air dryer.

It varies from country to country. De exemplu, in North America, 220V/60HZ/single-phase and 380V/60HZ/3-phase are common. At this moment, it needs to customize the refrigerant compressor. Sometimes the dyer price will also be different.

Some industries have requirements for the material of air compressor dryers. De exemplu, the pharmaceutical industry requires stainless steel. In this case, the piping and heat exchange system must be SS304. And the adsorption tower also needs SS304. în plus, the lithium battery industry also requires stainless steel.

The stainless steel dryer will be more expensive. Desigur, you can choose the Lingyu PD series refrigerated air dryer. You can also choose the modular desiccant compressed air dryer. They can also meet the requirements of food and pharmaceutical industries.

The usual refrigerant of refrigerant air dryers is R22. It is common in developing countries. in orice caz, European and American countries require eco-friendly refrigerants. For us, R134a, R407C, R410a are available. The dryer is a little more expensive if you want an eco-friendly refrigerant.

Small flow refrigerant air dryer is air cooled. Our air-cooled dryer can be up to 120 m³/min. If above 120 m³/min, the air compressor air dryer is water-cooled.

For high-flow dryers, the size will be very large if you need an air-cooled type. De exemplu, it will be as high as several floors. And the heat exchange efficiency will be much worse. The water-cooled dryer is not affected by a high-temperature environment. Desigur, there needs to be a cooling water system. So this will add cost.

① Fixed vs. Variable Frequency Refrigerated Air Dryer

We commonly use fixed-frequency air compressor dryers. It can meet the maximum output. in orice caz, in actual production activities, the air demand varies. At small demands, it still works at maximum output. This leads to a waste of energy. Dimpotrivă, the output of the variable frequency dryer can match the air demand. This results in significant energy and operation cost savings.

② Choice of Desiccant Dryer Regeneration Method

The heatless compressed air dryer has a small power of ~0.1 kW. But it has a big air consumption of about 15%. This is high energy consumption. Micro-heated desiccant dryer generally consumes about 8% of regeneration air. Compared to the heatless dryer, it can save 40% of energy.
The zero air loss desiccant dryer consumes 0% regeneration air. A heatless air compressor air dryer can save 70% of energy. Desigur, it is more expensive.

Measure or calculate the maximum compressed air flow rate that your air compressor system requires. This is usually expressed in cubic feet per minute (CFM). It is a crucial parameter for sizing the air dryer.

Determine the temperature and pressure of the compressed air at the dryer’s inlet. Aceste informații sunt necesare pentru a calcula debitul corectat și punctul de rouă.

Luați în considerare variațiile de temperatură și umiditate ambientală, deoarece acestea pot afecta performanța uscătorului de aer. Înțelegerea condițiilor de mediu ajută la selectarea tipului și specificațiilor adecvate de uscător.

Definiți punctul de rouă sau nivelul de umiditate dorit pentru aplicația dvs. Punctul de rouă este temperatura la care aerul devine saturat cu umiditate și începe să se condenseze. Alegerea unui punct de rouă potrivit pentru aplicare este crucială pentru a preveni potențialele probleme.

Alegeți tipul potrivit de uscător de aer în funcție de punctul de rouă și de aplicare. Tipurile comune includ uscătoarele frigorifice, uscătoare cu desicant, și uscătoare cu membrană. Fiecare tip are avantaje specifice și este potrivit pentru diferite cerințe de punct de rouă.

Reglați debitul de aer comprimat pentru condițiile reale folosind informațiile adunate mai devreme. Corectarea temperaturii și presiunii asigură că uscătorul de aer este dimensionat cu precizie.

Consultați specificațiile producătorului și datele de performanță pentru tipul de uscător de aer selectat. Astfel, poate verifica dacă poate face față debitului corectat și atinge punctul de rouă dorit.

Luați în considerare adăugarea unui factor de siguranță pentru a vă asigura că uscătorul de aer poate face față variațiilor cererii de aer și condițiilor de funcționare, oferind un tampon pentru fluctuațiile neașteptate.

Pe baza debitului corectat, cerințele punctului de rouă, factori de siguranță, și specificațiile producătorului, selectați dimensiunea și modelul potrivite de uscător de aer care corespunde nevoilor sistemului.

Instalați corect uscătorul de aer ales în sistemul de aer comprimat. Monitorizați-i în mod regulat performanța și mențineți-l conform recomandărilor producătorului pentru a asigura eficiență și fiabilitate optime.