45m³/phút Máy sấy không khí hút ẩm tái sinh bằng thép không gỉ cho máy nén khí

We know that normal desiccant dryers for air compressors are carbon steel. Tuy nhiên, many industries have sanitary requirements for air quality. So it must use the stainless steel. Lingyu Machinery has already produced many SS304 heated desiccant air dryers. The Twin Towers must be SUS304. Hơn thế nữa, other spare parts must also be stainless steel, such as valves, heaters, silencers, pressure gauges, vân vân.

Ngoài ra, other offshore platforms and marine have higher requirements. They usually need the SS316 heated regenerative desiccant air dryer. This is because 316 stainless steel is resistant to corrosion by chloride ions. Some customers also accept the 304 stainless plus special coating. For all the heated desiccant dryers with the above requirements, chúng tôi có thể sản xuất chúng.

There is an electric heater in the desiccant air dryers for compressed air. When starting regeneration, it will use less product air to purge. The average air loss of a heated desiccant dryer is 6%. But a heatless air dryer is about 13%. Dưới, we will compare the operation costs of two desiccant dryers.

Tóm lại là, the heated desiccant dryer is more energy-saving. The heated regenerative desiccant air dryer can save more CNY118230 each year.

Trước hết, our heated desiccant dryer adopts microcomputer intelligent automatic control. Nguồn cung cấp không khí liên tục và ổn định. There will be no intermittent outage phenomenon. Dễ dàng xử lý hơn. It can monitor operating data, such as cycle time, working status, nhiệt độ nóng, vân vân.

Hơn thế nữa, our heated regenerative desiccant air dryer is equipped with PLC. So it has a remote on/off function. Due to the passive, thường mở, dry contact, chain control can also be realized. Ngoài ra, the adsorption dryer also has an alarm function. Equipment operation is more secure. Maintenance is also more convenient.

Our desiccant type air dryer can ensure 100% -40℃ dew point. This is because our heated desiccant dryer has sufficient adsorbents. Take this 45m³/min dryer as an example. Có nhiều hơn 900 kg of adsorbent in the Twin Towers. Bên cạnh đó, there are more molecular sieves than alumina. Ngoài ra, our heated regenerative desiccant air dryer has structural advantages. Vì thế, it can guarantee a very low-pressure dew point. And the fluctuation of the dew point operation curve is small.