All in One 16 bar Screw Air Compressor Specifications
| 物品 | 1.6MPa Screw Air Compressor Data | |
| Industrial Screw Air Compressor Model | LY30APM | |
| Nominal Exhaust Pressure (酒吧) | 16 酒吧 | |
| Rated Volume Flow (m3/min) | 1.6 | |
| Cooling Type of All In One Air Compressor | Air-cooled | |
| 最大限度. 環境溫度. | 46℃ | |
| Number of Compression Stage | Single stage | |
| Oil Content in Exhaust Air | ≤3 ppm | |
| Outlet Pipe Diameter | G3/4 | |
| Transmission Method of Our Good Price Rotary Screw Air Compressor | 直接的 | |
| Lubricant Oil Quantity (L) | 13 | |
| Initial Lubricant Model | 46# | |
| 電源 | Three phase 380V/Single phase 220V/50Hz (others custom) | |
| Inhale Air State | Temp (℃) | Normal Temperature |
| 壓力 (兆帕) | 0.1033 | |
| Relative Humidity | 60% | |
| Permanent Magnet Main Motor | Motor Model | 160-30-22 |
| Rated Power (HP/kW) | 30 HP/22 KW | |
| V/ HZ | 380/135 | |
| Speed (轉速) | 2700 | |
| Starting Type | Variable Frequency Start | |
| Protection Class | IP23 | |
| Insulation Class | F Class | |
| Usage Factor | 1.2 | |
| Air Receiver Tank | Volume (m3) | 0.4 |
| Design Pressure (兆帕) | 1.98 | |
| Safety Valve Discharge Pressure (兆帕) | 2.18 | |
| 冷凍式空氣乾燥機 | 電源 | AC220V/50Hz |
| 力量 (千瓦) | 0.52 | |
| 壓力露點 (℃) | 2月10日 | |
| 空氣容量 (Nm3/min) | 2.4 | |
| 壓縮空氣過濾器 | 空氣流動 (Nm3/min) | 2.4 |
| Rated Pressure (兆帕) | 1.98 | |
| Industrial Screw Air Compressor Size (L ×W×H mm) | 1800×850×1930 | |
| 16 Bar Screw Air Compressor Weight (公斤) | 690 | |
為什麼選擇領宇 16 bar Industrial Screw Air Compressor
(1) Use High Quality Compressor Spare Parts
Our industrial screw air compressor not only has a good price but also has reliable quality. This is because our 16 bar screw compressor uses high-quality parts. The airend adopts the third-generation asymmetrical screw rotor profile. And use SKF heavy-duty bearings. Low speed and low wear greatly improve reliability.
(2) Energy Conservation
This industrial screw type air compressor is a variable frequency type. VSD air compressors are around 30% more energy efficient than ordinary air compressors. This is because there is no no-load energy consumption. 而且, our compressor’s airend volumetric efficiency is greater than 95%. And the drive mode of the 16bar screw compressor is direct. So the energy efficiency of our all-in-one air compressor is high.
(3) Clean Compressed Air
It adopts a high-efficiency refrigerated dryer and 4-stage precision filters. Ensure access to pure compressed air. The pressure dew point is as low as 3-10°C. The water removal effect is good. 除了, the air oil content is as low as 0.001PPM. The particle filtration accuracy reaches 0.01MM.
(4) Supply Sufficient Pressure
Meet the 16bar requirements of the laser industry. Both volume and pressure are sufficient. Because it is a PM VSD screw air compressor, it ensures that the working pressure is always stable. Make sure that cutting efficiency is higher and more stable.
(5) Convenient to Use
This industrial screw air compressor with dryer is compact. The unique integrated design saves space. The air compressor, dryer, 篩選, and air storage tank are all in one. No separate installation is required. Easy to operate. Plug and play.
How Does An Industrial Screw Type Air Compressor Work
這 16 bar screw air compressor with a dryer works by compressing air and then removing moisture from it. Here is a step-by-step explanation of how the process works:
- Air intake: The air intake valve opens. And allow air to enter the industrial screw type air compressor.
- Compression: A screw-type rotor compresses the air by rotating and moving it from the inlet to the discharge. The air pressure increases as it moves through the compression chamber.
- Cooling: 壓縮後, the hot compressed air is cooled to reduce its temperature. 同時, condense any moisture in the air. Then cooled air passes through an air/oil separator. It can remove any oil that may have been used for lubrication.
- Drying: The compressed air enters the refrigerant dryer. It can remove any remaining moisture. And the dryer can reduce the dew point to 3~10℃. 此外, the filters can remove the dust and oil vapors.
- Storage: The clean air is then stored in the receiver tank for use.
- Distribution: When need to use compressed air, it distribute air through pipes to the various tools and machines.
By compressing and drying air, an industrial screw air compressor with dryer can produce clean, 乾燥, and compressed air. It is suitable for a wide range of applications, such as pneumatic control systems, painting, sandblasting, and more. So above is the working principle of a 16 bar screw air compressor with dryer.
常見問題解答
Q1: What’s the dew point of your industrial screw air compressor?
A1: The dew point of our all-in-one air compressor is 3~10℃. So it can avoid the laser lens breaking.
Q2: Your 16 bar screw air compressor is three-phase or single-phase?
A2: Regularly it is three phases. But we can also customize the single-phase industrial screw air compressor.
第三季度: How many filters does your all-in-one air compressor have?
A3: There are 4pcs of coalescing compressed air filters. They are dust-removal and oil-removal.
第四季度: What’s the tank volume of your industrial rotary screw air compressor?
A4: The tank of this 16 bar screw air compressor is 400L.
