Specifications of The Small Refrigerant Air Dryer
| Dryer Model | LY-PD10S |
| Max Air Flow | 1.5m³/min |
| Available Voltage | 220V/50HZ 1-phase regular, 230V/240V or 60HZ is custom |
| Refrigeration Air Dryer Power | 0.5KW |
| Intake Air Temp. | Max 45℃ |
| Application Working Pressure | Max 16 bar |
| Pressure Loss of Small Air Dryer for Compressor | 0.15bar |
| Control Type | Rotary switch |
| Heat Exchanger | 3-in-1 Plate Exchanger, Stainless Steel Material |
| Refrigerant Type | R134a |
| Electronic Drain | Jorc brand |
| Throttling Device | Capillary tube |
| Bypass Valve | Electronic bypass valve |
| Safety Device | High and low pressure protection and fan pressure switch |
| Compressed Air Dryer Size | 780*480*450mm |
| Refrigerant Air Dryer Weight | 55KG |
| Inlet & Outlet Port Size | RC1″ |
Features of Our Small Refrigerated Air Dryer
This small refrigerant dryer is only 55KW. So you can easily move it. Moreover, it has a small footprint.
(1) Low Energy Consumption And Noise
Firstly, the power of this refrigeration dryer is small. It’s only 0.5KW. Moreover, the structural design is reasonable. The pressure loss is small. It’s below 0.15 bar. Therefore, the energy consumption of compressed air is small. Secondly, the dryer has low noise. It’s below 58dB. Therefore, it is especially suitable for labs and home shops. It doesn’t bother other people.
(2) Environmentally Friendly And Durable
The refrigerant of this small air dryer for compressor is R134a. It is not R22. So it will not damage the atmospheric environment. In addition, the heat exchanger uses the SS304 stainless steel. It is durable. Moreover, we can use it for many industries, such as medical, food, pharmaceutical, beverage, etc. The stainless steel will not rust. Thus, the heat exchanger does not pollute the compressed air.
(3) Dryer System Works Stable
The refrigeration system is an electronic expansion valve and pressure switch. It enables precise control. And the compressed air dryer has high and low-pressure protection. So, the system is more stable.
(4) Small Compressor Air Dryer Has A Stable Pressure Dew Point
The dryer uses the 3-in-1 plate heat exchanger. It is better than a traditional shell-tube-type heat exchanger. Because the heat transfer area is larger. So, the water removal effect is better. The pressure dew point is 2~10℃. But it can reach 2~8℃ under standard conditions.
Air Compressor Dryer Working Principle
The refrigeration dryer cools the compressed air to a temperature below its dew point. It causes the moisture to condense out of the air. Finally, remove water from the dryer system.
Firstly, compress the incoming air to increase its pressure and temperature. Then compressed air passes through a heat exchanger. Here, the air by refrigerant is circulated in a closed loop system. The refrigerant of this small air dryer for compressor is R134a. During air cooling, the moisture in the air begins to condense into liquid form. Afterward, the liquid is separated and drained out of the system.
The refrigerant air dryer system consists of four main components: compressor, heat exchanger, refrigeration system, and moisture separator. The compressor compresses the incoming air and delivers it to the dryer. The heat exchanger is responsible for cooling the compressed air using the refrigerant. The refrigeration system comprises the compressor, condenser, expansion valve, and evaporator. It is responsible for circulating the refrigerant through the system. Finally, the moisture separator removes the liquid condensate from the compressed air.
FAQs
Lingyu can manufacture a 350m³/min dryer.
The warranty time of Lingyu dryers is one year. And we can provide technical guide all the time.
Sure. In the refrigerant compressor, there is the R134a. So you can use the dryer directly.
The time is short if you need 220V/50HZ 1-phase. It’s about 15 days. But the time will be a bit longer for special voltages.
