冷媒式エアドライヤーは必須の圧縮空気処理装置です. We usually use refrigerant air dryers to remove moisture or water. 同時に, it can also reduce the air temperature. ついに, we can get a 2~10℃ pressure dew point. Refrigeration dryer uses the method of freezing and dehumidification. あれは, use the heat exchange of refrigerant and compressed air. Then control its temperature and dew point.
誰もが知っているように, many industries have high requirements for compressed air quality. These industries are below, such as pharmaceutical, 食べ物, スプレーする, printing, 繊維, 等. If only install desiccant air dryer, it may not meet these requirements. したがって, we usually also need to install a refrigerated compressed air dryer.
Why Need A Refrigerant Compressed Air Dryer?
Compressed air is a significant source of production power. But we generally do not use it directly. Because air condenses in the pipeline, there will be a lot of moisture and oil. As the pressure increases, the temperature decreases. The moisture content of saturated humid air is reduced. So water condensation will increase. Suppose there is a 55kW screw air compressor. It operates at an ambient temperature of 24°C. 加えて, 相対湿度は 75%. It will produce about 280 liters of water per day. This moisture and oil will corrode pipes and equipment. そのほか, it will also affect product quality. The main hazards caused by water in compressed air are as follows:
①まずは, the condensed water will remove the lubricated oil on the pneumatic equipment. So it will reduce the equipment efficiency;
② ２番目, the water will also accelerate the wear of the valves in the pipeline. ついに, cause the failure of pneumatic control equipment.
③ 第三に, cause the pipeline and equipment to corrode. そのほか, sometimes water freezing will occur in the lower part of the pipeline. Then there is a danger of the pipeline bursting;
④ High moisture content in compressed air will also directly affect product quality. 例えば, it will affect the quality of food and pharmaceuticals. 加えて, if there is water mist, it will affect the spray painting quality.
The Function of Refrigerated Air Dryer
It is precisely because of the above hazards that we need a refrigerant dryer. We need it to purify the impurities in the compressed air. It effectively removes moisture. So the dew point of our refrigeration air dryer can reach 2~10℃. さらに, it can also lower the temperature. This will protect piping and equipment. Guarantee the stability of production. 同時に, ensure the quality of industrial production.
加えて, we usually also use a refrigerant air dryer together with a desiccant dryer. It plays a vital role in the performance of the regenerative air dryer. Some industries have high requirements for dew point. 2~10℃ can not meet the requirements. So we need an adsorption air dryer. But the dew point is often challenging to reach if there is only the desiccant dryer. そのほか, its running load will be huge. したがって, it generally requires pre-cooling of compressed air.
Then we need to install the refrigerated air dryer before it. Perform preliminary cooling and dewatering. This can help to play the role of the adsorbent. It also reduces the consumption of regeneration air. To reduce economic losses.
How Does Refrigerated Air Dryer Work?
まず最初に, the compressed air enters the precooler and heat exchanger. After initial cooling, it produces condensed water. There is also dust inside. Then enter the evaporator of the refrigerated air dryer. Deep cooling is done here. 同時に, the dew point reaches 2~10℃. They are discharged from the separator. The low-temperature air is not directly discharged at this time. その代わり, go back to the heat exchanger. Output after heating. Thereby we get clean compressed air.
一方で, the compressor outputs high-pressure refrigerant. Then the cooler cools it down. And make it liquid. 濾過後, please send them to the capillary or expansion valve. その後, the liquid refrigerant enters the evaporator. Refrigerant cools the air. 同時に, it will absorb the heat of the compressed air. Then cover the liquid refrigerant in a gaseous state. ついに, repeat the above heat exchange process.
Applications of Refrigerant Air Dryer in Different Industries
Compressed air is an important energy source for industrial production. A refrigeration dryer can purify compressed air. It has been widely used in various industries. Let’s talk about the most common industries that use refrigerant air dryers.
(1) Refrigerated Compressed Air Dryer For Laser Cutting
Good air source quality is necessary for the laser cutting industry. If there are water mist and oil, they will be sprayed on the protective mirror surface. So it will seriously affect the transmission of the laser beam. Ultimately will also affect the cutting quality. The workpieces will have problems such as burrs and rough cutting surfaces. 同時に, oil and water will adhere to the laser cutter. This affects aesthetics. More seriously, it may cause damage to the laser head.
We need to remove three types of compressed air pollutants in the laser cutting industry.
① Water —— Use a refrigerated air dryer and a desiccant dryer. Removes most of the water content in compressed air. Bring the pressure dew point to around -20 to -40°C.
② Oil vapor —— Use a precision oil-removal filter. It can remove oil from compressed air.
③ Dust —— use the post-dust removal filter. It’s to ensure that dust does not enter the laser cutting equipment. Avoid dust contamination on optical lenses.
したがって, we recommend the following compressed air system: エアコンプレッサ + air storage tank + refrigerant dryer + adsorption dryer + precision filters. この上, it can guarantee the air quality for laser cutting. To improve the efficiency and quality of laser cutting!
(2) Refrigerant Air Dryer For PET Bottle Molding
What’s PET bottle molding? Injection molding of thermoplastic resin. Get tubular plastic parison. その後, please place it in a split mold while still hot. Immediately after the mold closing, introduce compressed air into the parison. Inflate the plastic parison against the inner wall of the mold. ついに, cool and de-mold. So we obtain various plastic bottle products.
In the blow molding industry, the working pressure of compressed air is relatively high. 一般的, reach 3.0MPa or 4.0MPa. Under this pressure, many gaseous water and oil pollutants will accumulate. This causes defects in various blow molding products. It will cause pockmarks or dirt on the surface of plastic bottles. 加えて, it will also affect the stability of PET bottle stereotypes.
したがって, it is essential to use a refrigerant air dryer. It effectively removes moisture and impurities. And help PET bottles fully crystallize at the moment of setting. もちろん, we must use medium and high-pressure refrigerated air dryers here.
(3) Refrigerated Air Dryer For Textile Industry
The textile industry is inseparable from air compressors. The rotary screw compressor is a significant power source for the production of textile enterprises. There are many production processes in the textile industry. The demand for air consumption in different processes is quite different. したがって, the demand for air compressors is also relatively large.
Air-jet looms are the equipment that uses the most compressed air. 同時に, air-coated wire and texturing machines also require compressed air. And so do the drying and transportation of chips in the chemical fiber industry. These machines require a stable air supply. It also requires the compressed air to be dry, oil-free, and clean. Refer to the operating requirements of various air-jet looms. The quality indicators of the compressed air are mainly as follows:
①まずは, remove the liquid water effectively. And remove as much gaseous moisture as possible. The pressure dew point should be below 10℃;
② ２番目, remove the oil vapors 0.8~1.0 μm;
③ 第三に, remove dust particles above 0.3~1.0 μm;
したがって, we have to install a refrigerated air dryer and precision filters. Use them to ensure the quality of compressed air. Only in this way it can guarantee the stability of textile production. 同時に, it can reduce the harm to textile equipment products to a minimum standard.
(4) Refrigeration Air Dryer For Food Industry
Compressed air has wide applications in the food industry. 例えば, beer, monosodium glutamate, lactic acid, beverages, and food fermentation require it as a power source. All pneumatic components and solenoid valves also need compressed air.
We need it to control the filling, packaging, and bottling automation. The transportation, fermentation, and spraying of powdered substances also require completely pure compressed air.
If there contains oil or other impurities, it will cause pollution. In the food industry, there cannot be any minor contamination. さもないと, it may bring physical hidden danger to consumers. On request, the air quality must meet the Class 2 standard in the food industry. そのほか, the compressed air dew point should be below -40°C.
So it would be best if you cleaned it first. The compressed air system includes an air compressor, air receiver, フィルター, dryers, 等. The pressure dew point of a refrigerant air dryer can only reach +2°C to +10°C. It cannot meet the air quality requirements of the food industry. したがって, it must also add a desiccant air dryer. もちろん, a refrigerated air dryer is also necessary. さもないと, it is impossible and difficult to meet the requirements.
(5) Refrigerant Air Dryer For Spray Painting
誰もが知っているように, the spraying industry relies heavily on compressed air. したがって, it is also very important to pay attention to the quality of compressed air. We generally have certain requirements for the aesthetics of the sprayed appearance. For example in car spray painting, if there are bubbles and pitting, it basically needs to be reworked. もちろん, spraying in different industries has different requirements for the moisture content of compressed air.
① Car Spraying And Metal Spray Paint
The requirements for automotive spraying are the highest. まず最初に, there must use a refrigerated air dryer. But it also needs to install a desiccant dryer. しかし, there is no need for a dryer in many car beauty shops. Because the air consumption is too small, using it is unnecessary.
Metal products generally require a smooth appearance. It is the same as the requirements for car spraying. It is not recommended to use only a refrigerant dryer for drying.
② Wood Product Spraying, Building Decoration
Most of the wood products are furniture spraying. Its requirements are not high. 加えて, architectural decoration, such as stair railings and wall spraying, do not have very high requirements for appearance. したがって, it only needs to use the refrigerated dryer as a separate drying machine.
③ Nano Spraying, Art Spray Painting
This is the high-end spraying industry. This type of spraying has high requirements for appearance aesthetics. And the spray material is relatively expensive. Rework costs are also high. したがって, it is not recommended only to use the refrigerated air dryer. In many cases, it is necessary to install an adsorption dryer.
(6) Refrigerated Air Dryer For Pharmaceutical Industry
In pharmaceutical factories, compressed air is also widely used. 例えば, filling machines and granulators of preparations need it. 加えて, pulping, 充填, and packaging machines are also required it. There are two types of compressed air in the pharmaceutical industry: one is a general oil-lubricated compressed air system. It’s for the pneumatic components of the instruments. They do not come into direct contact with medicines. The other is an oil-free compressed air system. They come into direct contact with medicines. It is important to note that even oil-free air contains a lot of water and impurities.
もちろん, the latter is currently most used by drug manufacturers. To ensure the air quality, its purification requirements are stringent. Compressed air systems are subject to validation. Only in this way can we meet the production requirements and pass the GMP certification inspection. Air sources in the pharmaceutical industry should meet the ISO8573.1-2001 standard. あれは, the dew point should be at least -40°C. Solid particle sizes ≤ 0.1 ミクロン. Oil content≤0.1mg/m³.
So we must use a refrigerated air dryer and a desiccant dryer to remove moisture. And it also requires the installation of precision filters. さらに, their materials must be 304 ステンレス鋼.