Tại sao khí nén cần máy sấy

All air compressor systems will generate condensation. Trước hết, the atmosphere contains many water vapor. During compression, moisture enters the system together. As the pressure rises and cools, they turn into liquid water. These water droplets mix with air. Cuối cùng, they become moist air.

Hơn thế nữa, the water vapor content will increase sharply with the increase in pressure. Ví dụ, compress the room air to 8 quán ba. The moisture content will increase approximately 8 lần. A 37KW air compressor will produce about 90L of water daily (relative humidity is 50%). Vì thế, we must discharge the water in the air storage tank daily. Nếu không thì, all kinds of problems will arise.

Moisture is troublesome in the manufacturing process. This could be better for users who use compressed air.

1. Trước hết, moisture tends to corrode pipes. So it will shorten the service life of the pipeline. Ngoài ra, water will mix with oil and dust. This can easily clog the pipes. Bên cạnh đó, water will also cause corrosion of pneumatic components, vân vân.;
2. thứ hai, it isn’t good for some special production processes. Ví dụ, water will affect power plant ash spraying, cement transportation, vân vân.;
3. thứ ba, it may also seriously impact product quality. Ví dụ, it will damage electronic products, medicines, đồ ăn, vân vân.;
4. Cũng, liquid water forms a water hammer at a certain speed. This will damage air-use equipment such as cylinders, vân vân.
5. The most terrible thing is that water will breed bacteria. This is very harmful to human health.

So we must dry the compressed air with dryers.

Air dryness is also known as moisture content. It generally refers to a certain amount of water vapor content in the air. We can define it in relative humidity, ppm of water content, or dew point. The dew point is a more useful term than relative humidity.

The dew point is defined as follows: Water vapor in the air cools under a certain pressure. At a certain time, condensation begins to form. We will call the temperature corresponding to this time the dew point. When the compressed air temperature and dew point are equal, the relative humidity is 100%. There are usually two types of dew points. Đó là, “atmospheric dew point” and “pressure dew point”.

Assume that the relative humidity of the air is 100%. Then the atmospheric dew point refers to the temperature value at standard atmospheric pressure.

Tương tự như vậy, assume that the relative humidity of the air is 100%. The pressure dew point refers to the temperature value under a certain pressure. We generally use the PDP to explain the drying performance of air dryers.

The pressure dew point must be greater than the normal pressure dew point. Ví dụ, the dew point value of 7 bar pressure is 3°C. Tại thời điểm này, the normal pressure dew point value is -20.8°C.

Different dew points, different water content. Ví dụ, assume that the pressure is 0.7MPa. When the pressure dew point is 10°C, the air moisture content is 1.2610g/m³. At a pressure dew point of 0°C, the water content of air is 0.7074g/m³. When the PDP is -20℃, the air-water content is only 0.1438g/m³.

The standard for measuring the moisture content of compressed air is ISO 8573-1:2010. It classifies the pressure dew point (PDP). Đó là, từ -70°C đến 10°C. Số PDP càng thấp, the higher the air quality need.

Different occasions, different pressure dew point requirements. Ví dụ, ordinary conveying lines, instrumentation air sources, and pneumatic tools need lower. The pressure dew point can be above 0℃. Precision spraying and food and beverage production requirements are high. The pressure dew point needed is below 0℃.

We made a comparison chart. This will better visualize the saturated water content of Class4~1 compressed air. Assume that there is 3600m3 compressed air. And the pressure is 7 quán ba. At 3℃ PDP, the water content is 20 liters. At -20℃, nó là 4.5 liters. And if PDP is -40℃, water content is less than 500 ml. Cuối cùng, nó là 10 ml at -70℃ pressure dew point.

Look at the chart again. For classes 4 ĐẾN 6, usually use the refrigerated air dryer. And for class 3 and below, we use a desiccant air dryer. Bên cạnh đó, for class 3, it can also use the membrane dryer.

Tất nhiên rồi, we must choose the dryer according to the air demand. Do not blindly pursue compressed air high quality.

The dryer utilizes the refrigeration principle to reduce compressed air temperature. Đồng thời, reduce the PDP pressure dew point to 3~10℃. Let the low-temperature refrigerant flow in the evaporator. Then it will exchange heat with the high-temperature air. Water vapor is supersaturated at low temperatures and condenses into liquid. Sau đó, separate the condensate from the compressed air. Cuối cùng, the water is get out of the dryer system. Refrigerant dryers can also remove some impurities and oil.

The working principle of an adsorption dryer is PSA. The desiccant in the working tower will adsorb the water vapor. Như vậy, it achieves the purpose of compressed air drying. Desiccant air dryer working is divided into two processes.

Một là quá trình hấp phụ. Compressed air through the working tower. Due to the role of physical adsorption power, water vapor penetrates the adsorbent. Aluminum oxide/molecular sieve reduces the water vapor content. The dew point of the desiccant dryer is up to -20/-40/-70℃. Nó có thể loại bỏ khoảng 98.95%/99.86%/99.99% of water vapor, respectively.

Another process is regeneration. Đó là, make the adsorbent above regain the adsorption capacity. So it can be prepared for the cycle work.