Features of The Air Compressor Desiccant Dryer
A. Ultimate Energy Saving
Compared with the fixed cycle mode, the self-developed ebz200-2 multi-core drive can save more than 10% of the comprehensive energy consumption. The dew point energy-saving control can be selected, and the adsorption time of a single tower can be prolonged under the condition of load fluctuation. The comprehensive energy consumption can be reduced by more than 30%. Compared with the traditional heatless regenerative dryer, 它可以節省超過 70% energy and is the best choice for matching centrifuge and oil-free screw compressor.
乙. Precise Control System
- 高性能氣動閥, 性能可靠, 使用壽命長.
- 台灣品牌高壓風機.
- 電器元件選用法國施耐德等國際品牌.
- 西門子PLC控制器, Kunlun Tongtai 7-inch large screen touch screen, 運行過程動態監控.
- 定制高性能吸附劑, 設計充填餘量 20%.
- 304 不銹鋼控制氣源管路, 美麗優雅.
- 特殊設計的分流器,吸附劑利用率高,氣體壓力損失低.
- 採用HTF軟件設計的高效冷卻器.
C. High-end Product Configuration
- 高性能氣動閥, 性能可靠, 使用壽命長.
- 台灣品牌高壓風機.
- 電器元件選用法國施耐德等國際品牌.
- 西門子PLC控制器, Kunlun Tongtai 7-inch large screen touch screen, 運行過程動態監控.
- 定制高性能吸附劑, 設計充填餘量 20%.
- 304 不銹鋼控制氣源管路, 美麗優雅.
- 特殊設計的分流器,吸附劑利用率高,氣體壓力損失低.
- 採用HTF軟件設計的高效冷卻器.
D. Precise Control System
Through RS485 communication interface MODBUS-RTU communication protocol (if other communication protocols are adopted, it will be determined by negotiation separately). Collect equipment operation parameters, remote start and stop control, upload and realize the operation status monitoring, and various fault information.
The most comprehensive signal acquisition, 監控, and display, including inlet temperature, heater temperature, regeneration tail gas temperature, a / b tower pressure, fan pressure, and dew point temperature (選修的).
Working Principle of Air Compressor Desiccant Dryer
The blower heated regenerative adsorption desiccant dryer(Micro gas consumption)is composed of two adsorption towers that work alternately. Including a blower, electric heater system, switching valve system, control system, ETC. In the whole working cycle, one adsorption tower is in adsorption, the other adsorption tower is in regeneration desorption. On the basis of the micro heat regeneration adsorption dryer, an independent high-efficiency blower is added. The ambient air inhaled by the blower is heated by the heater to desorb the moisture from the adsorbent. In the cooling stage, 關於 2% of the finished gas is used as the regeneration gas. The whole regeneration process consumes very little compressed air.