Parameters Data of Our SS304 Desiccant Air Dryer For Air Compressor
Item Content | 數據 |
Inlet Air Flow of Absorption Dryer | Std.45.0 Nm3 / 分鐘 | 2700 立方米 / 小時 |
Adsorption Air Dryer Dew Point | ≤-40℃或更低 確保100% |
Working Principle of Two Tower Air Dryer | PSA + TSA |
Dryer Model | LY-HH400HXS |
Heated Desiccant Dryer Material | SUS304 pressure vessel steel plate|GB/T3274-2007 |
Valves Material | Stainless steel |
Silencer/Muffler Material | Stainless steel |
Desiccant Beads Material | Efficient alumina and molecular sieves |
Working Cycle Time of Heated Regenerative Desiccant Air Dryer | 90~240 min(adjustable) |
Average Air Loss | 標準 6% | 最小. 3.5% 最大限度. 8% |
Suitable Inlet Air Pressure | 標準 7 巴 | 最小. 6 酒吧| 最大10巴 |
Pressure Loss of Heated Air Dryer System | 0.2 酒吧 |
Inlet Compressed Oil Content Requirement | ≤0.1ppm(mg/m3) |
Intake Air Temp. Requirement | 10~30℃ | 最低2℃ 最高40℃ |
Intake Air Dew Point Requirement | ≤15℃ |
Application Ambient Temp. Requirement | 最低2℃ 最高45℃ |
Power of Desiccant Air Dryers for Compressed Air | 13.4千瓦 |
電壓 | 380V 50HZ 3-phase (others custom) |
Stainless Steel Heated Desiccant Dryer Weight | 1830 公斤 |
Overall Size of Heat Regenerative Adsorption Dryer | 1822×1150×2801 mm |
Outlet Port Size | 通徑100 / 4」 |
設備噪音 | Less than 70dB |
Power of Stainless Steel Electric Heater | 13.3千瓦 |
Heating Temp. | 倫敦大學學院:180℃,拼箱:170℃ | 智慧恆溫控制 |
Remote Control Function | 標準 (with PLC) |
Alarm Functions | 標準 |
Why Choose Our Heated Regenerative Desiccant Air Dryer
(1) Custom Stainless Steel Material
We know that normal desiccant dryers for air compressors are carbon steel. 然而, many industries have sanitary requirements for air quality. So it must use the stainless steel. Lingyu Machinery has already produced many SS304 heated desiccant air dryers. The Twin Towers must be SUS304. 而且, other spare parts must also be stainless steel, such as valves, heaters, silencers, pressure gauges, ETC.
此外, other offshore platforms and marine have higher requirements. They usually need the SS316 heated regenerative desiccant air dryer. This is because 316 stainless steel is resistant to corrosion by chloride ions. Some customers also accept the 304 stainless plus special coating. For all the heated desiccant dryers with the above requirements, 我們可以生產它們.
(2) Save More Energy
There is an electric heater in the desiccant air dryers for compressed air. When starting regeneration, it will use less product air to purge. The average air loss of a heated desiccant dryer is 6%. But a heatless air dryer is about 13%. 以下, we will compare the operation costs of two desiccant dryers.
Comparion Item | 象徵 | 數據
Heatless Dryer |
Data of Heated Regenerative
除濕空氣乾燥機 |
單元 | 評論 |
Rated Air Capacity | 問 | 45 | 45 | 立方米/分鐘 | —— |
Electric Heater Power | P1 | 0 | 13.3 | 千瓦 | there is no heater for
heatless air dryer |
鼓風機功率 | P2 | 0 | 0 | 千瓦 | 沒有鼓風機 |
Average Air Loss | q | 13 | 6 | % | —— |
用水量 | v | 0 | 0 | 噸/小時 | 不需要冷卻水 |
電費單 | y1 | 1 | 1 | 中國新年 | 工業用電 |
Water Charge | y2 | 0.2 | 0.2 | 中國新年 | 工業循環水 |
每立方米空氣耗電量 | k | 5.8 | 5.8 | 千瓦 | —— |
單塔再生時間 | t1 | 5 | 4 | H | —— |
加熱時間 | t2 | 0 | 1.5 | H | not need heating for
heatless dryer |
Desiccant Dryer Cold Purge Time | t3 | 5 | 2 | H | —— |
Blower Working Time | t4 | 0 | 0 | H | 不需要吹 |
Working Time of Adsorption Air Dryer | 時間 | 8000 | 8000 | H | —— |
換算空氣消耗量
轉化為電能 |
271440 | 125280 | 中國新年 | 值=(Q*q*k*T) | |
Electricity Generated By Heater | 0 | 27930 | 中國新年 | 值=(P1*t2*0.7+P2*t4)*T/4 | |
Water Charge | 0 | 0 | 中國新年 | 值=(v*y2*T) | |
Total Operation Costs of
Desiccant Air Dryers for Compressed Air |
271440 | 153210 | 中國新年 | —— |
綜上所述, the heated desiccant dryer is more energy-saving. The heated regenerative desiccant air dryer can save more CNY118230 each year.
(3) With Multiple Functions
首先, our heated desiccant dryer adopts microcomputer intelligent automatic control. 供氣持續穩定. There will be no intermittent outage phenomenon. 更容易處理. It can monitor operating data, such as cycle time, working status, heater temperature, ETC.
而且, our heated regenerative desiccant air dryer is equipped with PLC. So it has a remote on/off function. Due to the passive, normally open, 幹接點, chain control can also be realized. 此外, the adsorption dryer also has an alarm function. Equipment operation is more secure. Maintenance is also more convenient.
(4) Stable And Reliable Pressure Dew Point
Our desiccant type air dryer can ensure 100% -40℃ dew point. This is because our heated desiccant dryer has sufficient adsorbents. Take this 45m³/min dryer as an example. There are more than 900 kg of adsorbent in the Twin Towers. 除了, there are more molecular sieves than alumina. 此外, our heated regenerative desiccant air dryer has structural advantages. 所以, it can guarantee a very low-pressure dew point. And the fluctuation of the dew point operation curve is small.
常見問題解答
The lead time of our ss304 heated desiccant dryer is about 40~50 days.
當然. You can require to add a dew point meter. 通常, we use the Suto brand.
Twin towers are SUS304. 此外, pipes, 閥門, heater, silencer, pressure gauge, and temperature sensor are all in stainless steel.
It is one year. And we will supply technical services all the time.