16 bar compressor has wide application in laser cutting and other industries. 16 bar is about 240 psi. This industrial screw air compressor is with tank and refrigerated dryer. Besides, there are also 4pcs of compressed air filters. So it can exhaust high quality air. The dew point can be 3~10℃. And oil content will be less than 3ppm. As a reliable manufacturer, we can supply good rotary screw air compressor price.

We can produce three phase and single phase industrial air compressor with dryer. So if you need 220V, 230V, 240V 50HZ or 60HZ 1-phase, we also supply it. This 4 in 1 air compressor is easy to install. You can use the all in one screw air compressor directly.

(1) Use high quality compressor spare parts

Our rotary screw air compressor not only has good price, but also has reliable quality. This is because our 16 bar screw compressor uses high quality parts. The airend adopts the third-generation asymmetrical screw rotor profile. And use SKF heavy-duty bearings. Low speed and low wear greatly improve reliability.

(2) Energy conservation

This industrial screw air compressor is variable frequency type. VSD air compressors are around 30% more energy efficient than ordinary air compressors. This is because there is no no-load energy consumption. Moreover, our compressor airend volumetric efficiency is greater than 95%. And the drive mode of 16bar screw compressor is direct. So the energy efficiency of our all ine one air compressor is high.

(3) Clean compressed air

It adopts high-efficiency refrigerated dryer and 4-stage precision filters. Ensure access to pure compressed air. The pressure dew point is as low as 3-10°C. The water removal effect is good. Besides, the air oil content is as low as 0.001PPM. The particle filtration accuracy reaches 0.01MM.

(4) Our 16 bar screw compressor supplies sufficient pressure

Meet the 16bar requirements of the laser industry. Both volume and pressure are sufficient. Because it is a PM VSD screw air compressor, it ensures that the working pressure is always stable. Make sure that cutting efficiency is higher and more stable.

(5) Convenient to use

This industrial screw air compressor with dryer is compact. Unique integrated design saves space. The air compressor, dryer, filter, and air storage tank are all in one. No separate installation is required. Easy to operate. Plug and play.

The 16 bar screw air compressor with a dryer works by compressing air and then removing moisture from it. Here is a step-by-step explanation of how the process works:

① Firstly, air intake: The air intake valve opens. And allow air to enter into the industrial screw type air compressor.

② Secondly, compression: A screw-type rotor compresses the air by rotating and moving it from the inlet to the discharge. The air pressure increases as it moves through the compression chamber.

③ Thirdly, cooling: After compression, the hot compressed air is cooled to reduce its temperature. At the same time, condense any moisture in the air. Then cooled air passes through an air/oil separator. It can remove any oil that may have been used for lubrication.

④ Fourthly, drying: The compressed air enters the refrigerant dryer. It can remove any remaining moisture. And the dryer can reduce the dew point to 3~10℃. In addition, the filters can remove the dust and oil vapors.

⑤ Fifthly, storage: The clean air is then stored in the receiver tank for use.

⑥ Finally, distribution: When need to use compressed air, it distribute air through pipes to the various tools and machines.

By compressing and drying air, an industrial screw air compressor with dryer can produce clean, dry, and compressed air. It is suitable for a wide range of applications, such as pneumatic control systems, painting, sandblasting, and more. So above is the working principle of 16 bar screw air compressor with dryer.

Q1: What’s the dew point of your industrial screw air compressor with dryer?

A1: The dew point of our all in one air compressor is 3~10℃. So it can avoid the laser lens breaking.

Q2: Your 16 bar screw air compressor is three phase or single phase?

A2: Regularly it is three phase. But we can also customize the single phase industrial screw air compressor.

Q3: How many filters does your all in one air compressor have?

A3: There are 4pcs of coalescing compressed air filters. They are dust-removal and oil-removal.

Q4: What’s the tank volume of your industrial screw air compressor with dryer?

A4: The tank of this 16 bar screw air compressor is 400L.