Product Performance Sheet of Lingyu Low Cost Nitrogen Generator
| แบบอย่าง | LYZD-E500 |
| Gas Flow | Std.500 Nm3/ h |
| Purity | 99.99% n2 nitrogen gas generator |
| พิมพ์ | PSA twin tower type |
| Work Cycle Time (Each Tower) | 45-60 seconds（time is adjustable） |
| Adsorption Pressure of N2 Onsite System | มาตรฐาน.0.8MPa | นาที.0.5MPa |
| Exit Pressure of N2 Gas | 0.1~0.65MPa (the outlet pressure is adjustable according to flow and purity) |
| Intake Air Oil Requirement | ≤0.01ppm (so there is oil-removal filter before n2 psa system) |
| Dust Content of Outlet Nitrogen Gas | ≤0.01um |
| Entrance Air Temperature | Std.30℃ | ต่ำสุด 2 ℃ สูงสุด 40 ℃ |
| System Outlet Gas Atmospheric Pressure Dewpoint | ≤-20℃ (it can be up to: -40 ~ -70 ℃ with desiccant air dryer) |
| Air Inlet Size of On Site Nitrogen Generator | DN100 / 4″ |
| Air Outlet Size of Nitrogen Generation Unit | DN80 / 3″ |
| Machine Voltage | 1-phase 220V 50 Hz (230วี, 240V or 60Hz are custom) |
| Total Power | 0.3กิโลวัตต์ |
| Equipment Net Weight | 6500 กิโลกรัม |
| Size of N2 Onsite Machine | 3750 H×4200 L×2100W (มม) |
| Noise Level | ≤70dB（A）（1m away from the nitrogen generation unit) |
| Operation Data Signal Acquisition / Monitoring / Display | |
| N2 Generator Dew Point Temperature Display | เลขที่ (custom) |
| N2 Gas Purity Meter | ใช่ |
| Gas Flow Meter | ใช่ |
| Air Inlet/Outlet Pressure Display | เลขที่ (custom) |
| Run/Fault Indication Display | ใช่ |
| Process Flow Diagram Display | ใช่ |
| Work Cycle Time Display | ใช่ |
| Working Cycle Step Status Display | ใช่ |
| Valves Working Status Display | เลขที่ (custom) |
| Control Functions of This Low Cost Nitrogen Generator | |
| IoT Communication Control | เลขที่ (custom) |
| การสื่อสารระยะไกล (RS485/RS232) | ใช่ |
| Local/Remote Power On/Off | ใช่ |
| Chain Control of N2 Onsite System | ใช่ |
| Fixed-cycle Control | ใช่ |
| Excessive Dew Point Display | ใช่ |
| N2 Gas Impure Emptying Display | ใช่ |
| Filter Maintenance Display | เลขที่ (custom) |
| Adsorbent Carbon Molecular Sieve Maintenance Display | ใช่ |
Features of This N2 Onsite Nitrogen Generation Unit
① Easy Operation
ประการแรก, the nitrogen generation unit is with a PLC controller. The pneumatic valve of the n2 onsite system can switch automatically. It can realize automatic stop-start switching. The system can produce nitrogen gas within 15 minutes of start-up. ดังนั้น, the machine can be left unattended. นอกจากนี้, you can control the PSA nitrogen plant remotely.
② Low Cost
ประการที่สอง, we are a nitrogen plant manufacturer. We can offer good price to our customers. นอกจากนี้, the gas consumption is small. The machine has an energy-saving control system. ดังนั้น, the running cost is also low.
③ Real-time Monitoring And Digital Display
ประการที่สาม, the system comes standard with a purity meter and flow meter. ดังนั้น, it can monitor the purity and flow rate of nitrogen gas in real-time. นอกจากนี้, the individual parameters are displayed digitally. It is easy to manage and control.
④ Top-quality Carbon Molecular Sieve And Valves
The lifetime of our carbon molecular sieve is 4~5 years. นอกจากนี้, we fill them with the blizzard method. And there is a cylinder compression device at the top. นอกจากนี้, our n2 onsite machine uses high-quality valves. The service life of pneumatic valves is more than 5 ปี. So the nitrogen generation unit is stable and reliable.
⑤ Intermediate Pressure Equalization
The traditional pressure equalization process is different. Its equalizing position is at the bottom. ทางนี้, the nitrogen production efficiency of carbon molecular sieves is relatively low. But our n2 onsite generator adopts intermediate pressure equalizing. This process has many advantages. ตัวอย่างเช่น, it increases the nitrogen gas recovery. Gas production rises. นอกจาก, it can save energy consumption.
คำถามที่พบบ่อย
ไตรมาสที่ 1: How to size and select an air compressor for my nitrogen generation unit?
A1: Take this 500Nm3/h low cost nitrogen generator as an example. Its purity is 99.99%. So the air nitrogen ratio is 6:1. We use Q to refer to the air capacity of the air compressor.
Q=500*6=3000Nm3/h=50m3/min.
ดังนั้น, we should select the air compressor and dryer according to this air capacity.
ไตรมาสที่ 2: What’s the delivery time of your n2 onsite generator?
A2: It will take about 30~40 days.
ไตรมาสที่ 3: Do you also provide a screw compressor and refrigerant dryer?
A3: ใช่. We are a nitrogen plant manufacturer. And we provide a complete n2 PSA system solution.
ไตรมาสที่ 4: Does your n2 onsite generator accept customization?
A4: ใช่. Our factory can customize the low cost nitrogen generator as customer requests.
