Specifications of Laser Special Refrigerant Air Dryer
รุ่นเครื่องทำลมแห้ง | LY-JC20AC |
การไหลของอากาศเข้า | Std.2.5Nm3 /min or 80 ซีเอฟเอ็ม |
ความดันอากาศเข้า | 10~16 bar |
อุณหภูมิอากาศเข้า | Std.45 ℃ | สูงสุด:50℃ |
อุณหภูมิในการทำงาน | มาตรฐาน 32 ℃ |ขั้นต่ำ 2 ℃สูงสุด:45℃ |
Compressor dryer system pressure loss | มาตรฐาน.0.2 บาร์ |
จุดน้ำค้างแรงดันขาออก | 2~8℃ |
วิธีการทำความเย็น | Air-cooled refrigerant dryer |
แรงดันไฟฟ้า | พลัง | 220V 50Hz 1-Phase | 0.81 กิโลวัตต์ |
Refrigerated dryer weight | 60กิโลกรัม |
Compressed air dryer size | 550L*500W*900H |
Precision filter | 4pcs coalescing filters |
Heat exchange system | integrate 3 ใน 1 plate heat exchanger |
Refrigerant compressor brand | Panasonic |
Advantages of our compressor air dryer | Output high quality clean compressed air |
โปรดทราบ: the 4pcs compressed air filters are outside dryer. แน่นอน, we can also customize to add internal filters in the refrigerant dryer.
Why Choose Our Refrigerant Air Dryer
- ประการแรก, it uses a 304 stainless steel plate heat exchanger. Heat exchange efficiency is high, and the structure is compact.
- ประการที่สอง, the precision filters are integrated with the refrigeration dryer. So it’s easy to install on-site.
- ประการที่สาม, the refrigerant dryer system is made of stainless steel. It will not rust. ดังนั้น, preventing compressed air pollution.
- The compressor air dryer uses Japan’s Panasonic compressor. It has super efficiency and cooling. Power saving and durable.
- Use an independent stainless steel air-water separator. It has high water separation efficiency. So it can get moisture, น้ำมัน, and impurities out in time.
- The refrigeration air dryer is with four precision filters. They can effectively remove oil and water from compressed air. ในเวลาเดียวกัน, it isolates impurities in the air. Significantly improve the purity of compressed air.
- นอกจาก, Lingyu has super customization ability. หากมีความจำเป็น, we can install the filters inside the refrigeration air dryer. นอกจากนี้, we can also add a digital display. This can display the evaporation temperature in real-time.
- Our refrigerated air dryer has multiple protection devices. It’s with high and low-voltage protection switches. So can effectively protect the compressor life. There is also an over-temperature alarm. ดังนั้น, it can reduce maintenance costs.
Why We Need The Refrigerated Air Dryer For Laser Cutting
The air source for laser cutting is compressed air. But there is water and oil vapor. So they will be sprayed on the surface of the laser protection mirror. This can seriously affect the laser beam. ในที่สุด, it will affect the cutting quality. ดังนั้น, it is necessary to purify the compressed air.
This refrigerated dryer has a 4-stage precision filter. The pressure dew point is 2~8 ℃. The oil content does not exceed 0.001ppM. The particle filtration precision is 0.01μm. So it can effectively remove moisture, น้ำมัน, ฝุ่น, and other impurities.
นอกจากนี้, it also needs to develop good operating habits. This protects the compressor and refrigeration dryer life. Some people start the air compressor first and then start the refrigerant dryer. It may only reach the desired pressure dew point for a short time. Then there will be still moisture in the compressed air. ณ ขณะนี้, operate the laser cutting machine. The protective lens will fog up.
ในทางตรงกันข้าม, the correct operating habits should be like this. Start the refrigerated dryer first. Wait for the refrigerant temperature to drop to about 5℃. Then start the air compressor.